Messages in this thread | | | Date | Fri, 8 Apr 2016 01:01:50 +0200 | From | Pavel Machek <> | Subject | Re: 4.4, 4.6: camera and unlock buttons produce tons of interrupts (was Re: N900 sleep mode) |
| |
Hi!
> > gzipped config is attached. > > > > Note that I'm still using NOLO. I enabled the sleep, then went to > > runlevel 1. LEDs still stay on, 55mA power consumption. That was with > > 1 in off_mode. > > Nothing idling for me with your .config.. And it seems slower to boot > compared to omap2plus_defconfig? Maybe because of the extra GPIO > interrupts?
Extra interrupts only happen when enable_off_mode is 1, so that should not be an issue during boot.
> Looks like you have 117 additional entries in .config enabled compared > to omap2plus_defconfig. Maybe go back to omap2plus_defconfig with minimal > changes and verify it idles properly first? > > I'm suspecting it's some driver(s) you have enabled causing the > issue.
I guess so. Do you (or anyone else) have minimum non-modular config for N900 that boots with video? Could I get lsmod from your system? (Yes, I still have nightmares from getting .config that works).
Thanks and best regards, Pavel
-- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
| |