lkml.org 
[lkml]   [2016]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] watchdog: qcom: Report reboot reason
From
On Mon, Apr 4, 2016 at 5:37 PM, Guenter Roeck <groeck@chromium.org> wrote:
> The Qualcom watchdog timer block reports if the system was reset by the
> watchdog. Pass the information to user space.
>
> Cc: Grant Grundler <grundler@chromium.org>
> Signed-off-by: Guenter Roeck <groeck@chromium.org>

Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>

Thanks Guenter! :)

FTR, this landed in the chromeos-3.14 (and chromeos-3.18 shortly)
branches and will be included in a future update for TP-Link Onhub
devices.

cheers,
grant

> ---
> drivers/watchdog/qcom-wdt.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index 20563cc..a043fa4 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -21,6 +21,7 @@
>
> #define WDT_RST 0x38
> #define WDT_EN 0x40
> +#define WDT_STS 0x44
> #define WDT_BITE_TIME 0x5C
>
> struct qcom_wdt {
> @@ -108,7 +109,8 @@ static const struct watchdog_ops qcom_wdt_ops = {
> static const struct watchdog_info qcom_wdt_info = {
> .options = WDIOF_KEEPALIVEPING
> | WDIOF_MAGICCLOSE
> - | WDIOF_SETTIMEOUT,
> + | WDIOF_SETTIMEOUT
> + | WDIOF_CARDRESET,
> .identity = KBUILD_MODNAME,
> };
>
> @@ -171,6 +173,9 @@ static int qcom_wdt_probe(struct platform_device *pdev)
> wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
> wdt->wdd.parent = &pdev->dev;
>
> + if (readl(wdt->base + WDT_STS) & 1)
> + wdt->wdd.bootstatus = WDIOF_CARDRESET;
> +
> /*
> * If 'timeout-sec' unspecified in devicetree, assume a 30 second
> * default, unless the max timeout is less than 30 seconds, then use
> --
> 2.8.0.rc3.226.g39d4020
>

\
 
 \ /
  Last update: 2016-04-05 21:41    [W:0.078 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site