lkml.org 
[lkml]   [2016]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] sched: loadavg 0.00, 0.01, 0.05 on idle, 1.00, 0.99, 0.95 on full load
Date
On 2016.04.28 11:46 Vik Heyndrickx wrote:

> Hi Peter,
>
>Systems show a minimal load average of 0.00, 0.01, 0.05 even when they
> have no load at all.
>
> Uptime and /proc/loadavg on all systems with kernels released during the
> last five years up until kernel version 4.6-rc5, show a 5- and 15-minute
> minimum loadavg of 0.01 and 0.05 respectively. This should be 0.00 on
> idle systems, but the way the kernel calculates this value prevents it
> from getting lower than the mentioned values.
>
> Likewise but not as obviously noticeable, a fully loaded system with no
> processes waiting, shows a maximum 1/5/15 loadavg of 1.00, 0.99, 0.95
> (multiplied by number of cores).
>
> Once the (old) load becomes 93 or higher, it mathematically can never
> get lower than 93, even when the active (load) remains 0 forever.
> This results in the strange 0.00, 0.01, 0.05 uptime values on idle
> systems. Note: 93/2048 = 0.0454..., which rounds up to 0.05.
>
> It is not correct to add a 0.5 rounding (=1024/2048) here, since the
> result from this function is fed back into the next iteration again,
> so the result of that +0.5 rounding value then gets multiplied by
> (2048-2037), and then rounded again, so there is a virtual "ghost"
> load created, next to the old and active load terms.
>
> By changing the way the internally kept value is rounded, that internal
> value equivalent now can reach 0.00 on idle, and 1.00 on full load. Upon
> increasing load, the internally kept load value is rounded up, when the
> load is decreasing, the load value is rounded down.
>
> The modified code was tested on nohz=off and nohz kernels. It was tested
> on vanilla kernel 4.6-rc5 and on centos 7.1 kernel 3.10.0-327. It was
> tested on single, dual, and octal cores system. It was tested on virtual
> hosts and bare hardware. No unwanted effects have been observed, and the
> problems that the patch intended to fix were indeed gone.
>
> Fixes: 0f004f5a696a ("sched: Cure more NO_HZ load average woes")
> Cc: Doug Smythies <dsmythies@telus.net>
> Tested-by: Damien Wyart <damien.wyart@free.fr>
> Signed-off-by: Vik Heyndrickx <vik.heyndrickx@veribox.net>
>
> --- kernel/sched/loadavg.c.orig 2016-04-25 01:17:05.000000000 +0200
> +++ kernel/sched/loadavg.c 2016-04-28 16:47:47.754266136 +0200
> @@ -99,10 +99,12 @@ long calc_load_fold_active(struct rq *th
> static unsigned long
> calc_load(unsigned long load, unsigned long exp, unsigned long active)
> {
> - load *= exp;
> - load += active * (FIXED_1 - exp);
> - load += 1UL << (FSHIFT - 1);
> - return load >> FSHIFT;
> + long unsigned newload;
> +
> + newload = load * exp + active * (FIXED_1 - exp);
> + if (active >= load)
> + newload += FIXED_1-1;
> + return newload / FIXED_1;
> }
>
> #ifdef CONFIG_NO_HZ_COMMON

See also: https://bugzilla.kernel.org/show_bug.cgi?id=45001
I also tested this patch on 2016.01.22. It works fine.


\
 
 \ /
  Last update: 2016-04-29 02:41    [W:3.423 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site