lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCHSET v5] Make background writeback great again for the first time
On Wed, Apr 27 2016, Jens Axboe wrote:
> On 04/27/2016 12:01 PM, Jan Kara wrote:
> >Hi,
> >
> >On Tue 26-04-16 09:55:23, Jens Axboe wrote:
> >>Since the dawn of time, our background buffered writeback has sucked.
> >>When we do background buffered writeback, it should have little impact
> >>on foreground activity. That's the definition of background activity...
> >>But for as long as I can remember, heavy buffered writers have not
> >>behaved like that. For instance, if I do something like this:
> >>
> >>$ dd if=/dev/zero of=foo bs=1M count=10k
> >>
> >>on my laptop, and then try and start chrome, it basically won't start
> >>before the buffered writeback is done. Or, for server oriented
> >>workloads, where installation of a big RPM (or similar) adversely
> >>impacts database reads or sync writes. When that happens, I get people
> >>yelling at me.
> >>
> >>I have posted plenty of results previously, I'll keep it shorter
> >>this time. Here's a run on my laptop, using read-to-pipe-async for
> >>reading a 5g file, and rewriting it. You can find this test program
> >>in the fio git repo.
> >
> >I have tested your patchset on my test system. Generally I have observed
> >noticeable drop in average throughput for heavy background writes without
> >any other disk activity and also somewhat increased variance in the
> >runtimes. It is most visible on this simple testcases:
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000
> >
> >and
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000 conv=fsync
> >
> >The machine has 4GB of ram, /mnt is an ext3 filesystem that is freshly
> >created before each dd run on a dedicated disk.
> >
> >Without your patches I get pretty stable dd runtimes for both cases:
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000
> >Runtimes: 87.9611 87.3279 87.2554
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000 conv=fsync
> >Runtimes: 93.3502 93.2086 93.541
> >
> >With your patches the numbers look like:
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000
> >Runtimes: 108.183, 97.184, 99.9587
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000 conv=fsync
> >Runtimes: 104.9, 102.775, 102.892
> >
> >I have checked whether the variance is due to some interaction with CFQ
> >which is used for the disk. When I switched the disk to deadline, I still
> >get some variance although, the throughput is still ~10% lower:
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000
> >Runtimes: 100.417 100.643 100.866
> >
> >dd if=/dev/zero of=/mnt/file bs=1M count=10000 conv=fsync
> >Runtimes: 104.208 106.341 105.483
> >
> >The disk is rotational SATA drive with writeback cache, queue depth of the
> >disk reported in /sys/block/sdb/device/queue_depth is 1.
> >
> >So I think we still need some tweaking on the low end of the storage
> >spectrum so that we don't lose 10% of throughput for simple cases like
> >this.
>
> Thanks for testing, Jan! I haven't tried old QD=1 SATA. I wonder if
> you are seeing smaller requests, and that is why it both varies and
> you get lower throughput? I'll try and setup a test here similar to
> yours.

Jan, care to try the below patch? I can't fully reproduce your issue on
a SCSI disk limited to QD=1, but I have a feeling this might help. It's
a bit of a hack, but the general idea is to allow one more request to
build up for QD=1 devices. That eliminates wait time between one request
finishing, and the next being submitted.


diff --git a/lib/wbt.c b/lib/wbt.c
index 650da911f24f..6b24c8525ace 100644
--- a/lib/wbt.c
+++ b/lib/wbt.c
@@ -93,23 +93,30 @@ void __wbt_done(struct rq_wb *rwb)
* If the device does write back caching, drop further down
* before we wake people up.
*/
- if (rwb->wc && !atomic_read(&rwb->bdi->wb.dirty_sleeping))
+ if (rwb->queue_depth == 1)
+ limit = 2;
+ else if (rwb->wc && !atomic_read(&rwb->bdi->wb.dirty_sleeping))
limit = 0;
else
limit = rwb->wb_normal;

+ inflight = atomic_dec_return(&rwb->inflight);
+
/*
- * Don't wake anyone up if we are above the normal limit. If
- * throttling got disabled (limit == 0) with waiters, ensure
- * that we wake them up.
+ * wbt got disabled with IO in flight. Wake up any potential
+ * waiters, we don't have to do more than that.
*/
- inflight = atomic_dec_return(&rwb->inflight);
- if (limit && inflight >= limit) {
- if (!rwb->wb_max)
- wake_up_all(&rwb->wait);
+ if (!rwb_enabled(rwb)) {
+ wake_up_all(&rwb->wait);
return;
}

+ /*
+ * Don't wake anyone up if we are above the normal limit.
+ */
+ if (inflight >= limit)
+ return;
+
if (waitqueue_active(&rwb->wait)) {
int diff = limit - inflight;

@@ -366,6 +373,9 @@ static inline unsigned int get_limit(struct rq_wb *rwb, unsigned long rw)
} else
limit = rwb->wb_normal;

+ if (rwb->queue_depth == 1)
+ limit = 2;
+
return limit;
}

--
Jens Axboe

\
 
 \ /
  Last update: 2016-04-27 23:01    [W:0.088 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site