lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] regulator: axp20x: Fix axp22x ldo_io registration error on cold boot
From
Date
Hi,

On 27-04-16 18:30, Mark Brown wrote:
> On Wed, Apr 27, 2016 at 06:04:53PM +0200, Hans de Goede wrote:
>> On 27-04-16 17:48, Mark Brown wrote:
>
>>> Well, I guess someone can just measure what happens?
>
>> What happens will likely depend on the pmic input voltage,
>> which can be either 5V from a charger / usb or can be approx
>> 3.8V from a lion or lipo battery. All linear regulators in
>> the axp20x / axp22x pmic are listed as having a max output
>> voltage of 3.3V, this likely has to do with the minimum
>> voltage drop compared to the input value.
>
> That sounds like it's a non-regulating bypass mode which is something we
> support; if the regulator is in bypass mode we'll look for the voltage
> from the parent rather than in the child regulator.

No these regulators do not have pass-by mode, what I'm trying
to say is that if the configured voltage gets to close to the supply
(e.g. 3.8V on a 3.8V battery) that the actual output then will not
be (even close to) what is configured due to the voltage drop
all linear regulators have.

My plan is to express this limitation using constraints in the dts,
while exposing the full 0.7 - 3.8V range in the driver, so that
the driver will no longer error out on the 0x1f register value
it encounters on the first get_voltage after a cold boot.

>> So in some conditions the output voltage at a 0x1f register
>> value may very well be different then at others. IMHO we
>> should just avoid any out of spec. values.
>
> As I've said before it'll be read only unless the system integrator
> explicitly says otherwise.

Ack.

>> I believe that we really need to write an in-spec value to the
>> register controlling the voltage, before enabling this regulator
>> (which is done by selecting the mux to connect it to the pin).
>
> We have a strong policy that we don't touch the hardware unless we are
> explicitly told it's OK to do so by the system integration, it's very
> hard to tell if things are in general going to be safe and if we get
> things wrong that could lead to physical damage.

Ack, I understand. The way I'm proposing to fix this does exactly
this. It will make us not touch the regulator unless there is a
dts node giving constraints for it.

Let me just send the new patch, that should make things clear.

Regards,

Hans

\
 
 \ /
  Last update: 2016-04-27 21:01    [W:1.116 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site