lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net: phy: at803x: Register 'link_change_notify' only for AT8030
Hi,

Sergei pointed out that the same patch was submitted yesterday by Timur (what are the chances?! :-) ) https://patchwork.ozlabs.org/patch/615019/

Regards,

Sebastian

On 04/27/2016 01:34 PM, Sebastian Frias wrote:
> There is no need to register the callback introduced by
> commit 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
> for non faulty PHYs.
>
> The check on the PHY ID is not necessary anymore and thus has been
> removed from the callback implementation as well.
>
> Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
>
> Signed-off-by: Sebastian Frias <sf84@laposte.net>
> ---
> drivers/net/phy/at803x.c | 43 ++++++++++++++++++++-----------------------
> 1 file changed, 20 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index b3ffaee..7fdc676 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -353,33 +353,32 @@ static void at803x_link_change_notify(struct phy_device *phydev)
> struct at803x_priv *priv = phydev->priv;
>
> /*
> - * Conduct a hardware reset for AT8030 every time a link loss is
> + * Conduct a hardware reset for AT8030 (this callback is only
> + * registered for AT8030 at the moment) every time a link loss is
> * signalled. This is necessary to circumvent a hardware bug that
> * occurs when the cable is unplugged while TX packets are pending
> * in the FIFO. In such cases, the FIFO enters an error mode it
> * cannot recover from by software.
> */
> - if (phydev->drv->phy_id == ATH8030_PHY_ID) {
> - if (phydev->state == PHY_NOLINK) {
> - if (priv->gpiod_reset && !priv->phy_reset) {
> - struct at803x_context context;
> -
> - at803x_context_save(phydev, &context);
> -
> - gpiod_set_value(priv->gpiod_reset, 1);
> - msleep(1);
> - gpiod_set_value(priv->gpiod_reset, 0);
> - msleep(1);
> -
> - at803x_context_restore(phydev, &context);
> -
> - phydev_dbg(phydev, "%s(): phy was reset\n",
> - __func__);
> - priv->phy_reset = true;
> - }
> - } else {
> - priv->phy_reset = false;
> + if (phydev->state == PHY_NOLINK) {
> + if (priv->gpiod_reset && !priv->phy_reset) {
> + struct at803x_context context;
> +
> + at803x_context_save(phydev, &context);
> +
> + gpiod_set_value(priv->gpiod_reset, 1);
> + msleep(1);
> + gpiod_set_value(priv->gpiod_reset, 0);
> + msleep(1);
> +
> + at803x_context_restore(phydev, &context);
> +
> + phydev_dbg(phydev, "%s(): phy was reset\n",
> + __func__);
> + priv->phy_reset = true;
> }
> + } else {
> + priv->phy_reset = false;
> }
> }
>
> @@ -391,7 +390,6 @@ static struct phy_driver at803x_driver[] = {
> .phy_id_mask = 0xffffffef,
> .probe = at803x_probe,
> .config_init = at803x_config_init,
> - .link_change_notify = at803x_link_change_notify,
> .set_wol = at803x_set_wol,
> .get_wol = at803x_get_wol,
> .suspend = at803x_suspend,
> @@ -427,7 +425,6 @@ static struct phy_driver at803x_driver[] = {
> .phy_id_mask = 0xffffffef,
> .probe = at803x_probe,
> .config_init = at803x_config_init,
> - .link_change_notify = at803x_link_change_notify,
> .set_wol = at803x_set_wol,
> .get_wol = at803x_get_wol,
> .suspend = at803x_suspend,
>

\
 
 \ /
  Last update: 2016-04-27 16:21    [W:0.048 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site