lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
From
Date
On 26/04/16 20:35, Grygorii Strashko wrote:
> On 04/26/2016 07:02 PM, Liviu Dudau wrote:
>> On Tue, Apr 26, 2016 at 06:28:52PM +0300, Grygorii Strashko wrote:
>>
>> Hi Grygorii,
>>
>> First time I'm seeing this patch, so I have a few questions, mostly
>> related to the commit message:
>
> Hm. You are in cc for RFC.
> Sry, forgot to add link [1].
>
>>
>>> This patch intended to fix following cases:
>>> - SoC-A has ARM GT, defines DT node for ARM GT and selects
>>> ARM_GLOBAL_TIMER statically in Kconfig file. SoC-B has ARM GT and
>>> defines DT node for ARM GT, but do not selects ARM_GLOBAL_TIMER
>>> statically in Kconfig file. In case of multiplatform build ARM GT will
>>> be implicitly enabled for SoC-B.
>>
>> Well, SoC-B has the GT *and* the DT node, so what is the problem with
>> enabling it for SoC-B? If there are reasons not to use the Global Timer
>> on SoC-B, surely a better option would be to mark it in DT with status = "disabled";
>
> This was rejected [2]. DT describes HW and if it is functional the status = "disabled"
> is not good choice.
> ARM GT can't be used as clocksource/sched_clock/clockevent when CPUFreq or
> CPUIdle are enabled :(, and this is Linux specific functionality and
> not HW description.

It sounds to me like the cleanest option might then be to address it
within the Linux-specific driver itself. How feasible would it be for
the GT driver to detect at runtime whether CPUfreq/idle will be used and
simply refuse to register as a clocksource if so? (I guess there are
probably horrible initialisation order issues, at least...)

Robin.

>>
>>>
>>> - There is no way to disable ARM GT without modifying Kconfig file,
>>> once ARM_GLOBAL_TIMER is selected statically in Kconfig file.
>>
>> What about disabling the DT node?
>>
>> Not sure I properly understand the problem you are trying to solve here.
>
> I'd like to have way to enable/disable ARM GT without modifying Kernel sources
> (Kconfig specifically) which is now impossible.
>
>>
>>>
>>> Hence, fix above case by defining both HAVE_ARM_GLOBAL_TIMER and
>>> ARM_GLOBAL_TIMER as recommended by 'Adding common features and make
>>> the usage configurable' section in kconfig-language.txt. All places in
>>> ARM folder where ARM_GLOBAL_TIMER was used now replaced on
>>> HAVE_ARM_GLOBAL_TIMER.
>>
>> I'm OK with the way you have changed ARM_GLOBAL_TIMER from a sticky config
>> option to a selectable one, but I would like more details on the problem
>> this was causing you.
>>
>
> The same HW (board) could be used with PM features enabled (power saving)
> and disabled (-RT). Without this change it will require to have
> and maintain two branches, but with it - just separate defconfig.
>
> [1] http://lists.infradead.org/pipermail/linux-rockchip/2016-February/007159.html
> [2] http://www.spinics.net/lists/devicetree/msg102918.html
>
>>
>>>
>>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>>> Cc: Florian Fainelli <f.fainelli@gmail.com>
>>> Cc: Russell King <linux@arm.linux.org.uk>
>>> Cc: Wei Xu <xuwei5@hisilicon.com>
>>> Cc: Shawn Guo <shawnguo@kernel.org>
>>> Cc: Sascha Hauer <kernel@pengutronix.de>
>>> Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
>>> Cc: Maxime Coquelin <maxime.coquelin@st.com>
>>> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
>>> Cc: Liviu Dudau <liviu.dudau@arm.com>
>>> Cc: Sudeep Holla <sudeep.holla@arm.com>
>>> Cc: Jun Nie <jun.nie@linaro.org>
>>> Cc: Michal Simek <michal.simek@xilinx.com>
>>> Cc: Jesper Nilsson <jesper.nilsson@axis.com>
>>> Cc: Lars Persson <lars.persson@axis.com>
>>> Cc: Mike Looijmans <mike.looijmans@topic.nl>
>>> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
>>> Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>>> ---
>>> Changes is v1:
>>> - updated mach-artpec
>>> - rebased on top of tip: timers/core
>>> commit: 86d3473 time: Introduce do_sys_settimeofday64()
>>>
>>> arch/arm/mach-artpec/Kconfig | 2 +-
>>> arch/arm/mach-bcm/Kconfig | 4 ++--
>>> arch/arm/mach-hisi/Kconfig | 2 +-
>>> arch/arm/mach-imx/Kconfig | 2 +-
>>> arch/arm/mach-rockchip/Kconfig | 2 +-
>>> arch/arm/mach-sti/Kconfig | 2 +-
>>> arch/arm/mach-uniphier/Kconfig | 2 +-
>>> arch/arm/mach-vexpress/Kconfig | 2 +-
>>> arch/arm/mach-zx/Kconfig | 2 +-
>>> arch/arm/mach-zynq/Kconfig | 2 +-
>>> drivers/clocksource/Kconfig | 7 ++++++-
>>> 11 files changed, 17 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig
>>> index 6cbe5a2..6cbca77 100644
>>> --- a/arch/arm/mach-artpec/Kconfig
>>> +++ b/arch/arm/mach-artpec/Kconfig
>>> @@ -9,7 +9,7 @@ config MACH_ARTPEC6
>>> depends on ARCH_MULTI_V7
>>> select ARM_AMBA
>>> select ARM_GIC
>>> - select ARM_GLOBAL_TIMER
>
> [...]
>

\
 
 \ /
  Last update: 2016-04-27 12:21    [W:0.075 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site