lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/8] char/rtc: move mc146818rtc code out of asm-generic/rtc.h
The subject should be:
rtc: cmos: move mc146818rtc code out of asm-generic/rtc.h

Else, you can add:
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>


On 26/04/2016 at 23:44:08 +0200, Arnd Bergmann wrote :
> Drivers should not really include stuff from asm-generic directly,
> and the PC-style cmos rtc driver does this in order to reuse the
> mc146818 implementation of get_rtc_time/set_rtc_time rather than
> the architecture specific one for the architecture it gets built for.
>
> To make it more obvious what is going on, this moves and renames the
> two functions into include/linux/mc146818rtc.h, which holds the
> other mc146818 specific code. Ideally it would be in a .c file,
> but that would require extra infrastructure as the functions are
> called by multiple drivers with conflicting dependencies.
>
> With this change, the asm-generic/rtc.h header also becomes much
> more generic, so it can be reused more easily across any architecture
> that still relies on the genrtc driver.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/rtc/rtc-cmos.c | 12 +--
> include/asm-generic/rtc.h | 206 ++------------------------------------------
> include/linux/mc146818rtc.h | 194 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 205 insertions(+), 207 deletions(-)
>
> diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
> index 84fb541038be..c7993f18edfa 100644
> --- a/drivers/rtc/rtc-cmos.c
> +++ b/drivers/rtc/rtc-cmos.c
> @@ -43,7 +43,7 @@
> #include <linux/of_platform.h>
>
> /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
> -#include <asm-generic/rtc.h>
> +#include <linux/mc146818rtc.h>
>
> struct cmos_rtc {
> struct rtc_device *rtc;
> @@ -190,10 +190,10 @@ static inline void cmos_write_bank2(unsigned char val, unsigned char addr)
> static int cmos_read_time(struct device *dev, struct rtc_time *t)
> {
> /* REVISIT: if the clock has a "century" register, use
> - * that instead of the heuristic in get_rtc_time().
> + * that instead of the heuristic in mc146818_get_time().
> * That'll make Y3K compatility (year > 2070) easy!
> */
> - get_rtc_time(t);
> + mc146818_get_time(t);
> return 0;
> }
>
> @@ -205,7 +205,7 @@ static int cmos_set_time(struct device *dev, struct rtc_time *t)
> * takes effect exactly 500ms after we write the register.
> * (Also queueing and other delays before we get this far.)
> */
> - return set_rtc_time(t);
> + return mc146818_set_time(t);
> }
>
> static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
> @@ -1142,14 +1142,14 @@ static __init void cmos_of_init(struct platform_device *pdev)
> if (val)
> CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
>
> - get_rtc_time(&time);
> + cmos_read_time(&pdev->dev, &time);
> ret = rtc_valid_tm(&time);
> if (ret) {
> struct rtc_time def_time = {
> .tm_year = 1,
> .tm_mday = 1,
> };
> - set_rtc_time(&def_time);
> + cmos_set_time(&pdev->dev, &def_time);
> }
> }
> #else
> diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
> index 4e3b6558331e..4fcff22cd707 100644
> --- a/include/asm-generic/rtc.h
> +++ b/include/asm-generic/rtc.h
> @@ -12,12 +12,12 @@
> #ifndef __ASM_RTC_H__
> #define __ASM_RTC_H__
>
> -#include <linux/mc146818rtc.h>
> #include <linux/rtc.h>
> -#include <linux/bcd.h>
> -#include <linux/delay.h>
> -#ifdef CONFIG_ACPI
> -#include <linux/acpi.h>
> +
> +#ifndef get_rtc_time
> +#include <linux/mc146818rtc.h>
> +#define get_rtc_time mc146818_get_time
> +#define set_rtc_time mc146818_set_time
> #endif
>
> #define RTC_PIE 0x40 /* periodic interrupt enable */
> @@ -31,202 +31,6 @@
> #define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
> #define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
>
> -/*
> - * Returns true if a clock update is in progress
> - */
> -static inline unsigned char rtc_is_updating(void)
> -{
> - unsigned char uip;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&rtc_lock, flags);
> - uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
> - spin_unlock_irqrestore(&rtc_lock, flags);
> - return uip;
> -}
> -
> -static inline unsigned int __get_rtc_time(struct rtc_time *time)
> -{
> - unsigned char ctrl;
> - unsigned long flags;
> - unsigned char century = 0;
> -
> -#ifdef CONFIG_MACH_DECSTATION
> - unsigned int real_year;
> -#endif
> -
> - /*
> - * read RTC once any update in progress is done. The update
> - * can take just over 2ms. We wait 20ms. There is no need to
> - * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
> - * If you need to know *exactly* when a second has started, enable
> - * periodic update complete interrupts, (via ioctl) and then
> - * immediately read /dev/rtc which will block until you get the IRQ.
> - * Once the read clears, read the RTC time (again via ioctl). Easy.
> - */
> - if (rtc_is_updating())
> - mdelay(20);
> -
> - /*
> - * Only the values that we read from the RTC are set. We leave
> - * tm_wday, tm_yday and tm_isdst untouched. Even though the
> - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
> - * by the RTC when initially set to a non-zero value.
> - */
> - spin_lock_irqsave(&rtc_lock, flags);
> - time->tm_sec = CMOS_READ(RTC_SECONDS);
> - time->tm_min = CMOS_READ(RTC_MINUTES);
> - time->tm_hour = CMOS_READ(RTC_HOURS);
> - time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
> - time->tm_mon = CMOS_READ(RTC_MONTH);
> - time->tm_year = CMOS_READ(RTC_YEAR);
> -#ifdef CONFIG_MACH_DECSTATION
> - real_year = CMOS_READ(RTC_DEC_YEAR);
> -#endif
> -#ifdef CONFIG_ACPI
> - if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> - acpi_gbl_FADT.century)
> - century = CMOS_READ(acpi_gbl_FADT.century);
> -#endif
> - ctrl = CMOS_READ(RTC_CONTROL);
> - spin_unlock_irqrestore(&rtc_lock, flags);
> -
> - if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
> - {
> - time->tm_sec = bcd2bin(time->tm_sec);
> - time->tm_min = bcd2bin(time->tm_min);
> - time->tm_hour = bcd2bin(time->tm_hour);
> - time->tm_mday = bcd2bin(time->tm_mday);
> - time->tm_mon = bcd2bin(time->tm_mon);
> - time->tm_year = bcd2bin(time->tm_year);
> - century = bcd2bin(century);
> - }
> -
> -#ifdef CONFIG_MACH_DECSTATION
> - time->tm_year += real_year - 72;
> -#endif
> -
> - if (century)
> - time->tm_year += (century - 19) * 100;
> -
> - /*
> - * Account for differences between how the RTC uses the values
> - * and how they are defined in a struct rtc_time;
> - */
> - if (time->tm_year <= 69)
> - time->tm_year += 100;
> -
> - time->tm_mon--;
> -
> - return RTC_24H;
> -}
> -
> -#ifndef get_rtc_time
> -#define get_rtc_time __get_rtc_time
> -#endif
> -
> -/* Set the current date and time in the real time clock. */
> -static inline int __set_rtc_time(struct rtc_time *time)
> -{
> - unsigned long flags;
> - unsigned char mon, day, hrs, min, sec;
> - unsigned char save_control, save_freq_select;
> - unsigned int yrs;
> -#ifdef CONFIG_MACH_DECSTATION
> - unsigned int real_yrs, leap_yr;
> -#endif
> - unsigned char century = 0;
> -
> - yrs = time->tm_year;
> - mon = time->tm_mon + 1; /* tm_mon starts at zero */
> - day = time->tm_mday;
> - hrs = time->tm_hour;
> - min = time->tm_min;
> - sec = time->tm_sec;
> -
> - if (yrs > 255) /* They are unsigned */
> - return -EINVAL;
> -
> - spin_lock_irqsave(&rtc_lock, flags);
> -#ifdef CONFIG_MACH_DECSTATION
> - real_yrs = yrs;
> - leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
> - !((yrs + 1900) % 400));
> - yrs = 72;
> -
> - /*
> - * We want to keep the year set to 73 until March
> - * for non-leap years, so that Feb, 29th is handled
> - * correctly.
> - */
> - if (!leap_yr && mon < 3) {
> - real_yrs--;
> - yrs = 73;
> - }
> -#endif
> -
> -#ifdef CONFIG_ACPI
> - if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> - acpi_gbl_FADT.century) {
> - century = (yrs + 1900) / 100;
> - yrs %= 100;
> - }
> -#endif
> -
> - /* These limits and adjustments are independent of
> - * whether the chip is in binary mode or not.
> - */
> - if (yrs > 169) {
> - spin_unlock_irqrestore(&rtc_lock, flags);
> - return -EINVAL;
> - }
> -
> - if (yrs >= 100)
> - yrs -= 100;
> -
> - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
> - || RTC_ALWAYS_BCD) {
> - sec = bin2bcd(sec);
> - min = bin2bcd(min);
> - hrs = bin2bcd(hrs);
> - day = bin2bcd(day);
> - mon = bin2bcd(mon);
> - yrs = bin2bcd(yrs);
> - century = bin2bcd(century);
> - }
> -
> - save_control = CMOS_READ(RTC_CONTROL);
> - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
> - save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
> - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
> -
> -#ifdef CONFIG_MACH_DECSTATION
> - CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
> -#endif
> - CMOS_WRITE(yrs, RTC_YEAR);
> - CMOS_WRITE(mon, RTC_MONTH);
> - CMOS_WRITE(day, RTC_DAY_OF_MONTH);
> - CMOS_WRITE(hrs, RTC_HOURS);
> - CMOS_WRITE(min, RTC_MINUTES);
> - CMOS_WRITE(sec, RTC_SECONDS);
> -#ifdef CONFIG_ACPI
> - if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> - acpi_gbl_FADT.century)
> - CMOS_WRITE(century, acpi_gbl_FADT.century);
> -#endif
> -
> - CMOS_WRITE(save_control, RTC_CONTROL);
> - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
> -
> - spin_unlock_irqrestore(&rtc_lock, flags);
> -
> - return 0;
> -}
> -
> -#ifndef set_rtc_time
> -#define set_rtc_time __set_rtc_time
> -#endif
> -
> static inline unsigned int get_rtc_ss(void)
> {
> struct rtc_time h;
> diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
> index 433e0c74d643..e9e346b37846 100644
> --- a/include/linux/mc146818rtc.h
> +++ b/include/linux/mc146818rtc.h
> @@ -14,6 +14,12 @@
> #include <asm/io.h>
> #include <linux/rtc.h> /* get the user-level API */
> #include <asm/mc146818rtc.h> /* register access macros */
> +#include <linux/bcd.h>
> +#include <linux/delay.h>
> +
> +#ifdef CONFIG_ACPI
> +#include <linux/acpi.h>
> +#endif
>
> #ifdef __KERNEL__
> #include <linux/spinlock.h> /* spinlock_t */
> @@ -120,4 +126,192 @@ struct cmos_rtc_board_info {
> #define RTC_IO_EXTENT_USED RTC_IO_EXTENT
> #endif /* ARCH_RTC_LOCATION */
>
> +/*
> + * Returns true if a clock update is in progress
> + */
> +static inline unsigned char mc146818_is_updating(void)
> +{
> + unsigned char uip;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&rtc_lock, flags);
> + uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
> + spin_unlock_irqrestore(&rtc_lock, flags);
> + return uip;
> +}
> +
> +static inline unsigned int mc146818_get_time(struct rtc_time *time)
> +{
> + unsigned char ctrl;
> + unsigned long flags;
> + unsigned char century = 0;
> +
> +#ifdef CONFIG_MACH_DECSTATION
> + unsigned int real_year;
> +#endif
> +
> + /*
> + * read RTC once any update in progress is done. The update
> + * can take just over 2ms. We wait 20ms. There is no need to
> + * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
> + * If you need to know *exactly* when a second has started, enable
> + * periodic update complete interrupts, (via ioctl) and then
> + * immediately read /dev/rtc which will block until you get the IRQ.
> + * Once the read clears, read the RTC time (again via ioctl). Easy.
> + */
> + if (mc146818_is_updating())
> + mdelay(20);
> +
> + /*
> + * Only the values that we read from the RTC are set. We leave
> + * tm_wday, tm_yday and tm_isdst untouched. Even though the
> + * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
> + * by the RTC when initially set to a non-zero value.
> + */
> + spin_lock_irqsave(&rtc_lock, flags);
> + time->tm_sec = CMOS_READ(RTC_SECONDS);
> + time->tm_min = CMOS_READ(RTC_MINUTES);
> + time->tm_hour = CMOS_READ(RTC_HOURS);
> + time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
> + time->tm_mon = CMOS_READ(RTC_MONTH);
> + time->tm_year = CMOS_READ(RTC_YEAR);
> +#ifdef CONFIG_MACH_DECSTATION
> + real_year = CMOS_READ(RTC_DEC_YEAR);
> +#endif
> +#ifdef CONFIG_ACPI
> + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> + acpi_gbl_FADT.century)
> + century = CMOS_READ(acpi_gbl_FADT.century);
> +#endif
> + ctrl = CMOS_READ(RTC_CONTROL);
> + spin_unlock_irqrestore(&rtc_lock, flags);
> +
> + if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
> + {
> + time->tm_sec = bcd2bin(time->tm_sec);
> + time->tm_min = bcd2bin(time->tm_min);
> + time->tm_hour = bcd2bin(time->tm_hour);
> + time->tm_mday = bcd2bin(time->tm_mday);
> + time->tm_mon = bcd2bin(time->tm_mon);
> + time->tm_year = bcd2bin(time->tm_year);
> + century = bcd2bin(century);
> + }
> +
> +#ifdef CONFIG_MACH_DECSTATION
> + time->tm_year += real_year - 72;
> +#endif
> +
> + if (century)
> + time->tm_year += (century - 19) * 100;
> +
> + /*
> + * Account for differences between how the RTC uses the values
> + * and how they are defined in a struct rtc_time;
> + */
> + if (time->tm_year <= 69)
> + time->tm_year += 100;
> +
> + time->tm_mon--;
> +
> + return RTC_24H;
> +}
> +
> +/* Set the current date and time in the real time clock. */
> +static inline int mc146818_set_time(struct rtc_time *time)
> +{
> + unsigned long flags;
> + unsigned char mon, day, hrs, min, sec;
> + unsigned char save_control, save_freq_select;
> + unsigned int yrs;
> +#ifdef CONFIG_MACH_DECSTATION
> + unsigned int real_yrs, leap_yr;
> +#endif
> + unsigned char century = 0;
> +
> + yrs = time->tm_year;
> + mon = time->tm_mon + 1; /* tm_mon starts at zero */
> + day = time->tm_mday;
> + hrs = time->tm_hour;
> + min = time->tm_min;
> + sec = time->tm_sec;
> +
> + if (yrs > 255) /* They are unsigned */
> + return -EINVAL;
> +
> + spin_lock_irqsave(&rtc_lock, flags);
> +#ifdef CONFIG_MACH_DECSTATION
> + real_yrs = yrs;
> + leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
> + !((yrs + 1900) % 400));
> + yrs = 72;
> +
> + /*
> + * We want to keep the year set to 73 until March
> + * for non-leap years, so that Feb, 29th is handled
> + * correctly.
> + */
> + if (!leap_yr && mon < 3) {
> + real_yrs--;
> + yrs = 73;
> + }
> +#endif
> +
> +#ifdef CONFIG_ACPI
> + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> + acpi_gbl_FADT.century) {
> + century = (yrs + 1900) / 100;
> + yrs %= 100;
> + }
> +#endif
> +
> + /* These limits and adjustments are independent of
> + * whether the chip is in binary mode or not.
> + */
> + if (yrs > 169) {
> + spin_unlock_irqrestore(&rtc_lock, flags);
> + return -EINVAL;
> + }
> +
> + if (yrs >= 100)
> + yrs -= 100;
> +
> + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
> + || RTC_ALWAYS_BCD) {
> + sec = bin2bcd(sec);
> + min = bin2bcd(min);
> + hrs = bin2bcd(hrs);
> + day = bin2bcd(day);
> + mon = bin2bcd(mon);
> + yrs = bin2bcd(yrs);
> + century = bin2bcd(century);
> + }
> +
> + save_control = CMOS_READ(RTC_CONTROL);
> + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
> + save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
> + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
> +
> +#ifdef CONFIG_MACH_DECSTATION
> + CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
> +#endif
> + CMOS_WRITE(yrs, RTC_YEAR);
> + CMOS_WRITE(mon, RTC_MONTH);
> + CMOS_WRITE(day, RTC_DAY_OF_MONTH);
> + CMOS_WRITE(hrs, RTC_HOURS);
> + CMOS_WRITE(min, RTC_MINUTES);
> + CMOS_WRITE(sec, RTC_SECONDS);
> +#ifdef CONFIG_ACPI
> + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> + acpi_gbl_FADT.century)
> + CMOS_WRITE(century, acpi_gbl_FADT.century);
> +#endif
> +
> + CMOS_WRITE(save_control, RTC_CONTROL);
> + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
> +
> + spin_unlock_irqrestore(&rtc_lock, flags);
> +
> + return 0;
> +}
> +
> #endif /* _MC146818RTC_H */
> --
> 2.7.0
>

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-04-27 11:41    [W:0.173 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site