lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net v3 5/5] drivers: net: cpsw: use of_phy_connect() in fixed-link case
Date
From: David Rivshin <drivshin@allworx.com>

If a fixed-link DT subnode is used, the phy_device was looked up so
that a PHY ID string could be constructed and passed to phy_connect().
This is not necessary, as the device_node can be passed directly to
of_phy_connect() instead. This reuses the same codepath as if the
phy-handle DT property was used.

Signed-off-by: David Rivshin <drivshin@allworx.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---

Changes since v2 [1]:
- Added Tested-by from Andrew Goodbody [3]
- Added Reviewed-by from Mugunthan V N [4]
- Added Reviewed-by from Grygorii Strashko [5]

Changes since v1 [2]:
- Rebased (trivial conflict, e5a03bfd modified the deleted snprintf)
- Added Tested-by from Nicolas Chauvet

[1] http://patchwork.ozlabs.org/patch/613276/
[2] http://patchwork.ozlabs.org/patch/560327/
[3] https://lkml.org/lkml/2016/4/22/537
[4] https://lkml.org/lkml/2016/4/22/63
[5] https://lkml.org/lkml/2016/4/22/529


drivers/net/ethernet/ti/cpsw.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 712bc6d..e2fcdf1 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2044,30 +2044,21 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
"phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
if (slave_data->phy_node) {
dev_dbg(&pdev->dev,
"slave[%d] using phy-handle=\"%s\"\n",
i, slave_data->phy_node->full_name);
} else if (of_phy_is_fixed_link(slave_node)) {
- struct device_node *phy_node;
- struct phy_device *phy_dev;
-
/* In the case of a fixed PHY, the DT node associated
* to the PHY is the Ethernet MAC DT node.
*/
ret = of_phy_register_fixed_link(slave_node);
if (ret)
return ret;
- phy_node = of_node_get(slave_node);
- phy_dev = of_phy_find_device(phy_node);
- if (!phy_dev)
- return -ENODEV;
- snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
- PHY_ID_FMT, phy_dev->mdio.bus->id,
- phy_dev->mdio.addr);
+ slave_data->phy_node = of_node_get(slave_node);
} else if (parp) {
u32 phyid;
struct device_node *mdio_node;
struct platform_device *mdio;

if (lenp != (sizeof(__be32) * 2)) {
dev_err(&pdev->dev, "Invalid slave[%d] phy_id property\n", i);
--
2.5.5
\
 
 \ /
  Last update: 2016-04-28 04:01    [W:0.148 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site