lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net v3 0/5] drivers: net: cpsw: phy-handle fixes
Date
From: David Rivshin <drivshin@allworx.com>

This series fixes a number of related issues around using phy-handle
properties in cpsw emac nodes.

Patch 1 fixes a bug if more than one slave is used, and either
slave uses the phy-handle property in the devicetree.

Patch 2 fixes a NULL pointer dereference which can occur if a
phy-handle property is used and of_phy_connect() return NULL,
such as with a bad devicetree.

Patch 3 fixes an issue where the phy-mode property would be ignored
if a phy-handle property was used. This also fixes a bogus error
message that would be emitted.

Patch 4 fixes makes the binding documentation more explicit that
exactly one PHY property should be used, and also marks phy_id as
deprecated.

Patch 5 cleans up the fixed-link case to work like the now-fixed
phy-handle case.

I have tested on the following hardware configurations:
- (EVMSK) dual emac, phy_id property in both slaves
- (EVMSK) dual emac, phy-handle property in both slaves
- (EVMSK) a bad phy-handle property pointing to &mmc1
- (EVMSK) phy_id property with incorrect PHY address
- (BeagleBoneBlack) single emac, phy_id property
- (custom) single emac, fixed-link subnode

Andrew Goodbody reported testing v2 on a board that doesn't use
dual_emac mode, but with 2 PHYs using phy-handle properties [1].

Nicolas Chauvet reported testing v2 on an HP t410 (dm8148).

Markus Brunner reported testing v1 on the following [2]:
- emac0 with phy_id and emac1 with fixed phy
- emac0 with phy-handle and emac1 with fixed phy
- emac0 with fixed phy and emac1 with fixed phy

[1] https://lkml.org/lkml/2016/4/22/537
[2] http://www.spinics.net/lists/netdev/msg357890.html

David Rivshin (5):
drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac
config
drivers: net: cpsw: fix segfault in case of bad phy-handle
drivers: net: cpsw: don't ignore phy-mode if phy-handle is used
dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
drivers: net: cpsw: use of_phy_connect() in fixed-link case

Documentation/devicetree/bindings/net/cpsw.txt | 6 +--
drivers/net/ethernet/ti/cpsw.c | 69 ++++++++++++++------------
drivers/net/ethernet/ti/cpsw.h | 1 +
3 files changed, 41 insertions(+), 35 deletions(-)

--
2.5.5

\
 
 \ /
  Last update: 2016-04-28 03:21    [W:0.093 / U:5.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site