lkml.org 
[lkml]   [2016]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [[PATCH v2] 1/8] ARM: dts: STi: STiH407: Provide generic (safe) DVFS configuration
On Tue, 26 Apr 2016, Maxime Coquelin wrote:

> Hi Lee,
>
> Series is applied, thanks for having done the changes.
>
> Note that I had to rework all the commit titles, because of the double
> brackets ("[[PATCH v2] 1/8]").
> Something wrong with your script?

Apologies. Nothing wrong with the script, this was a manual error
that I didn't catch until after they'd been sent. Problem was

`git format-patch $sha..HEAD --subject-prefix="[PATCH v2]"`

... I should have omitted the '[]'s, since gfp does this for you.

> On 04/21/2016 05:07 PM, Lee Jones wrote:
> >You'll notice that the voltage cell is populated with 0's. Voltage
> >information is very platform specific, even depends on 'cut' and
> >'substrate' versions. Thus it is left blank for a generic (safe)
> >implementation. If other nodes/properties are provided by the
> >bootloader, the ST CPUFreq driver will over-ride these generic
> >values.
> >
> >Signed-off-by: Lee Jones <lee.jones@linaro.org>
> >Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
> >---
> > arch/arm/boot/dts/stih407-family.dtsi | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> >index 81f8121..9fa1e58 100644
> >--- a/arch/arm/boot/dts/stih407-family.dtsi
> >+++ b/arch/arm/boot/dts/stih407-family.dtsi
> >@@ -22,15 +22,29 @@
> > device_type = "cpu";
> > compatible = "arm,cortex-a9";
> > reg = <0>;
> >+
> > /* u-boot puts hpen in SBC dmem at 0xa4 offset */
> > cpu-release-addr = <0x94100A4>;
> >+
> >+ /* kHz uV */
> >+ operating-points = <1500000 0
> >+ 1200000 0
> >+ 800000 0
> >+ 500000 0>;
> > };
> > cpu@1 {
> > device_type = "cpu";
> > compatible = "arm,cortex-a9";
> > reg = <1>;
> >+
> > /* u-boot puts hpen in SBC dmem at 0xa4 offset */
> > cpu-release-addr = <0x94100A4>;
> >+
> >+ /* kHz uV */
> >+ operating-points = <1500000 0
> >+ 1200000 0
> >+ 800000 0
> >+ 500000 0>;
> > };
> > };
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-04-26 19:41    [W:0.751 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site