lkml.org 
[lkml]   [2016]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 04/23] ata: sata_dwc_460ex: burst size must be in items not bytes
Date
The burst size as defined by DMAengine API is in items of address width. Derive
burst size from AHB_DMA_BRST_DFLT (64 bytes) by dividing it to
DMA_SLAVE_BUSWIDTH_4_BYTES (4 bytes) that gives us 16 items.

Tested-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/ata/sata_dwc_460ex.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index aee8873..4cac27d 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -65,7 +65,7 @@
#define NO_IRQ 0
#endif

-#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/
+#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length */

enum {
SATA_DWC_MAX_PORTS = 1,
@@ -318,8 +318,8 @@ static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd
}

sconf.direction = qc->dma_dir;
- sconf.src_maxburst = AHB_DMA_BRST_DFLT;
- sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
+ sconf.src_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
+ sconf.dst_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;

--
2.8.0.rc3
\
 
 \ /
  Last update: 2016-04-26 11:21    [W:0.195 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site