lkml.org 
[lkml]   [2016]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 1/8] drm/rect: Add some drm_clip_rect utility functions
From
Date

Den 25.04.2016 18:38, skrev Ville Syrjälä:
> On Mon, Apr 25, 2016 at 06:05:20PM +0200, Daniel Vetter wrote:
>> On Mon, Apr 25, 2016 at 06:09:44PM +0300, Ville Syrjälä wrote:
>>> On Mon, Apr 25, 2016 at 04:03:13PM +0200, Noralf Trønnes wrote:
>>>> Den 25.04.2016 15:02, skrev Ville Syrjälä:
>>>>> On Mon, Apr 25, 2016 at 02:55:52PM +0200, Noralf Trønnes wrote:
>>>>>> Den 25.04.2016 14:39, skrev Ville Syrjälä:
>>>>>>> On Sun, Apr 24, 2016 at 10:48:55PM +0200, Noralf Trønnes wrote:
>>>>>>>> Add some utility functions for struct drm_clip_rect.
>>>>>>> Looks like mostly you're just duplicating the drm_rect stuff. Why can't
>>>>>>> you use what's there already?
>>>>>> That's because the framebuffer flushing uses drm_clip_rect and not drm_rect:
>>>>> Converting to drm_rect is not an option?
>>>> That's difficult or at least verbose to do because clips is an array.
>>>> I could use drm_rect on the calling side (fbdev) since it's only one clip
>>>> which the changes are merged into, and then convert it when I call dirty().
>>>> But the driver can get zero or more clips from the dirty ioctl so I don't
>>>> see a clean way to convert this array to drm_rect without more code than
>>>> this proposal has.
>>> Just some kind of simple drm_clip_rect_to_rect() thing should be enough AFAICS.
>> Yeah, drm_clip_rect is the uapi struct, drm_rect is the internal one.
>> Similar case is drm_display_mode vs. drm_mode_modeinfo. We have
>> umode_to_mode and mode_to_umode helpers to deal with that. I do agree that
>> it would make sense to switch the internal ->dirty callback over to the
>> internal drm_struct. Would need a kmalloc+copy in the dirtyfb ioctl, but
>> since the structs actually match in their member names (just not the
>> size/signedness, sigh) there shouldn't be any need for driver changes. So
>> fairly simple patch.
> Or if we want to avoid the malloc, then the merge() thing could just
> internally convert one at a time on stack when going through them.
> Though then someone might want to do a merge() with internal drm_rects,
> and we'd be right where we started. But I'm not sure that will happen,
> so perhaps it's just too much future proofing.
>
>> Ofc you need to compile-test all the drivers (at least those using ->dirty
>> hook) to make sure gcc is still happy with all the signed vs. unsigned
>> stuff. Maybe that turns up something, but hopefully not.
>>
>> Sorry for that late request, but I really didn't realize what's going on
>> here :(
>> -Daniel

How about we just drop this patch?
I couldn't find anyone else that merge these clips, they just loop and
handle them individually.

The relevant part in drm_fb_helper would become:

static void drm_fb_helper_dirty_work(struct work_struct *work)
{
struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
dirty_work);
struct drm_clip_rect *clip = &helper->dirty_clip;
struct drm_clip_rect clip_copy;
unsigned long flags;

spin_lock_irqsave(&helper->dirty_lock, flags);
clip_copy = *clip;
clip->x1 = clip->y1 = ~0;
clip->x2 = clip->y2 = 0;
spin_unlock_irqrestore(&helper->dirty_lock, flags);

helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1);
}

static void drm_fb_helper_dirty_init(struct drm_fb_helper *helper)
{
spin_lock_init(&helper->dirty_lock);
INIT_WORK(&helper->dirty_work, drm_fb_helper_dirty_work);
helper->dirty_clip.x1 = helper->dirty_clip.y1 = ~0;
}

static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
u32 width, u32 height)
{
struct drm_fb_helper *helper = info->par;
struct drm_clip_rect *clip = &helper->dirty_clip;
unsigned long flags;

if (!helper->fb->funcs->dirty)
return;

spin_lock_irqsave(&helper->dirty_lock, flags);
clip->x1 = min(clip->x1, x);
clip->y1 = min(clip->y1, y);
clip->x2 = max(clip->x2, x + width);
clip->y2 = max(clip->y2, y + height);
spin_unlock_irqrestore(&helper->dirty_lock, flags);

schedule_work(&helper->dirty_work);
}


And the driver would use this tinydrm function:

void tinydrm_merge_clips(struct drm_clip_rect *dst,
struct drm_clip_rect *src, unsigned num_clips,
unsigned flags, u32 width, u32 height)
{
int i;

if (!src || !num_clips) {
dst->x1 = 0;
dst->x2 = width;
dst->y1 = 0;
dst->y2 = height;
return;
}

dst->x1 = dst->y1 = ~0;
dst->x2 = dst->y2 = 0;

for (i = 0; i < num_clips; i++) {
if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
i++;
dst->x1 = min(dst->x1, src[i].x1);
dst->x2 = max(dst->x2, src[i].x2);
dst->y1 = min(dst->y1, src[i].y1);
dst->y2 = max(dst->y2, src[i].y2);
}

if (dst->x2 > width || dst->y2 > height ||
dst->x1 >= dst->x2 || dst->y1 >= dst->y2) {
DRM_DEBUG_KMS("Illegal clip: x1=%u, x2=%u, y1=%u, y2=%u\n",
dst->x1, dst->x2, dst->y1, dst->y2);
dst->x1 = dst->y1 = 0;
dst->x2 = width;
dst->y2 = height;
}
}

static int mipi_dbi_dirtyfb(struct drm_framebuffer *fb, void *vmem,
unsigned flags, unsigned color,
struct drm_clip_rect *clips, unsigned num_clips)
{
struct drm_clip_rect clip;

tinydrm_merge_clips(&clip, clips, num_clips, flags,
fb->width, fb->height);



>>>> Here's the driver side:
>>>>
>>>> static int mipi_dbi_dirtyfb(struct drm_framebuffer *fb, void *vmem,
>>>> unsigned flags, unsigned color,
>>>> struct drm_clip_rect *clips, unsigned num_clips)
>>>> {
>>>> struct tinydrm_device *tdev = fb->dev->dev_private;
>>>> struct lcdreg *reg = tdev->lcdreg;
>>>> struct drm_clip_rect full_clip = {
>>>> .x1 = 0,
>>>> .x2 = fb->width,
>>>> .y1 = 0,
>>>> .y2 = fb->height,
>>>> };
>>>> struct drm_clip_rect clip;
>>>> int ret;
>>>>
>>>> drm_clip_rect_reset(&clip);
>>>> drm_clip_rect_merge(&clip, clips, num_clips, flags,
>>>> fb->width, fb->height);
>>>> if (!drm_clip_rect_intersect(&clip, &full_clip)) {
>>>> DRM_DEBUG_KMS("Empty clip\n");
>>>> return -EINVAL;
>>>> }
>>>> [...]
>>>>>> struct drm_framebuffer_funcs {
>>>>>> [...]
>>>>>> int (*dirty)(struct drm_framebuffer *framebuffer,
>>>>>> struct drm_file *file_priv, unsigned flags,
>>>>>> unsigned color, struct drm_clip_rect *clips,
>>>>>> unsigned num_clips);
>>>>>> };
>>>>>>
>>>>>>>> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
>>>>>>>> ---
>>>>>>>> drivers/gpu/drm/drm_rect.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>> include/drm/drm_rect.h | 69 ++++++++++++++++++++++++++++++++++++++++++++++
>>>>>>>> 2 files changed, 136 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
>>>>>>>> index a8e2c86..a9fb1a8 100644
>>>>>>>> --- a/drivers/gpu/drm/drm_rect.c
>>>>>>>> +++ b/drivers/gpu/drm/drm_rect.c
>>>>>>>> @@ -434,3 +434,70 @@ void drm_rect_rotate_inv(struct drm_rect *r,
>>>>>>>> }
>>>>>>>> }
>>>>>>>> EXPORT_SYMBOL(drm_rect_rotate_inv);
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * drm_clip_rect_intersect - intersect two clip rectangles
>>>>>>>> + * @r1: first clip rectangle
>>>>>>>> + * @r2: second clip rectangle
>>>>>>>> + *
>>>>>>>> + * Calculate the intersection of clip rectangles @r1 and @r2.
>>>>>>>> + * @r1 will be overwritten with the intersection.
>>>>>>>> + *
>>>>>>>> + * RETURNS:
>>>>>>>> + * %true if rectangle @r1 is still visible after the operation,
>>>>>>>> + * %false otherwise.
>>>>>>>> + */
>>>>>>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
>>>>>>>> + const struct drm_clip_rect *r2)
>>>>>>>> +{
>>>>>>>> + r1->x1 = max(r1->x1, r2->x1);
>>>>>>>> + r1->y1 = max(r1->y1, r2->y1);
>>>>>>>> + r1->x2 = min(r1->x2, r2->x2);
>>>>>>>> + r1->y2 = min(r1->y2, r2->y2);
>>>>>>>> +
>>>>>>>> + return drm_clip_rect_visible(r1);
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL(drm_clip_rect_intersect);
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * drm_clip_rect_merge - Merge clip rectangles
>>>>>>>> + * @dst: destination clip rectangle
>>>>>>>> + * @src: source clip rectangle(s), can be NULL
>>>>>>>> + * @num_clips: number of source clip rectangles
>>>>>>>> + * @flags: drm_mode_fb_dirty_cmd flags (DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
>>>>>>>> + * @width: width of clip rectangle if @src is NULL
>>>>>>>> + * @height: height of clip rectangle if @src is NULL
>>>>>>>> + *
>>>>>>>> + * The dirtyfb ioctl allows for a NULL clip rectangle to be passed in,
>>>>>>>> + * so if @src is NULL, width and height is used to set a full clip rectangle.
>>>>>>>> + * @dst takes part in the merge unless it is empty {0,0,0,0}.
>>>>>>>> + */
>>>>>>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
>>>>>>>> + struct drm_clip_rect *src, unsigned num_clips,
>>>>>>>> + unsigned flags, u32 width, u32 height)
>>>>>>>> +{
>>>>>>>> + int i;
>>>>>>>> +
>>>>>>>> + if (!src || !num_clips) {
>>>>>>>> + dst->x1 = 0;
>>>>>>>> + dst->x2 = width;
>>>>>>>> + dst->y1 = 0;
>>>>>>>> + dst->y2 = height;
>>>>>>>> + return;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + if (drm_clip_rect_is_empty(dst)) {
>>>>>>>> + dst->x1 = ~0;
>>>>>>>> + dst->y1 = ~0;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + for (i = 0; i < num_clips; i++) {
>>>>>>>> + if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
>>>>>>>> + i++;
>>>>>>>> + dst->x1 = min(dst->x1, src[i].x1);
>>>>>>>> + dst->x2 = max(dst->x2, src[i].x2);
>>>>>>>> + dst->y1 = min(dst->y1, src[i].y1);
>>>>>>>> + dst->y2 = max(dst->y2, src[i].y2);
>>>>>>>> + }
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL(drm_clip_rect_merge);
>>>>>>>> diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
>>>>>>>> index 83bb156..936ad8d 100644
>>>>>>>> --- a/include/drm/drm_rect.h
>>>>>>>> +++ b/include/drm/drm_rect.h
>>>>>>>> @@ -24,6 +24,8 @@
>>>>>>>> #ifndef DRM_RECT_H
>>>>>>>> #define DRM_RECT_H
>>>>>>>>
>>>>>>>> +#include <uapi/drm/drm.h>
>>>>>>>> +
>>>>>>>> /**
>>>>>>>> * DOC: rect utils
>>>>>>>> *
>>>>>>>> @@ -171,4 +173,71 @@ void drm_rect_rotate_inv(struct drm_rect *r,
>>>>>>>> int width, int height,
>>>>>>>> unsigned int rotation);
>>>>>>>>
>>>>>>>> +/**
>>>>>>>> + * drm_clip_rect_width - determine the clip rectangle width
>>>>>>>> + * @r: clip rectangle whose width is returned
>>>>>>>> + *
>>>>>>>> + * RETURNS:
>>>>>>>> + * The width of the clip rectangle.
>>>>>>>> + */
>>>>>>>> +static inline int drm_clip_rect_width(const struct drm_clip_rect *r)
>>>>>>>> +{
>>>>>>>> + return r->x2 - r->x1;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * drm_clip_rect_height - determine the clip rectangle height
>>>>>>>> + * @r: clip rectangle whose height is returned
>>>>>>>> + *
>>>>>>>> + * RETURNS:
>>>>>>>> + * The height of the clip rectangle.
>>>>>>>> + */
>>>>>>>> +static inline int drm_clip_rect_height(const struct drm_clip_rect *r)
>>>>>>>> +{
>>>>>>>> + return r->y2 - r->y1;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * drm_clip_rect_visible - determine if the the clip rectangle is visible
>>>>>>>> + * @r: clip rectangle whose visibility is returned
>>>>>>>> + *
>>>>>>>> + * RETURNS:
>>>>>>>> + * %true if the clip rectangle is visible, %false otherwise.
>>>>>>>> + */
>>>>>>>> +static inline bool drm_clip_rect_visible(const struct drm_clip_rect *r)
>>>>>>>> +{
>>>>>>>> + return drm_clip_rect_width(r) > 0 && drm_clip_rect_height(r) > 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * drm_clip_rect_reset - Reset clip rectangle
>>>>>>>> + * @clip: clip rectangle
>>>>>>>> + *
>>>>>>>> + * Sets clip rectangle to {0,0,0,0}.
>>>>>>>> + */
>>>>>>>> +static inline void drm_clip_rect_reset(struct drm_clip_rect *clip)
>>>>>>>> +{
>>>>>>>> + clip->x1 = 0;
>>>>>>>> + clip->x2 = 0;
>>>>>>>> + clip->y1 = 0;
>>>>>>>> + clip->y2 = 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +/**
>>>>>>>> + * drm_clip_rect_is_empty - Is clip rectangle empty?
>>>>>>>> + * @clip: clip rectangle
>>>>>>>> + *
>>>>>>>> + * Returns true if clip rectangle is {0,0,0,0}.
>>>>>>>> + */
>>>>>>>> +static inline bool drm_clip_rect_is_empty(struct drm_clip_rect *clip)
>>>>>>>> +{
>>>>>>>> + return (!clip->x1 && !clip->x2 && !clip->y1 && !clip->y2);
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
>>>>>>>> + const struct drm_clip_rect *r2);
>>>>>>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
>>>>>>>> + struct drm_clip_rect *src, unsigned num_clips,
>>>>>>>> + unsigned flags, u32 width, u32 height);
>>>>>>>> +
>>>>>>>> #endif
>>>>>>>> --
>>>>>>>> 2.2.2
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> dri-devel mailing list
>>>>>>>> dri-devel@lists.freedesktop.org
>>>>>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>>> --
>>> Ville Syrjälä
>>> Intel OTC
>>> _______________________________________________
>>> dri-devel mailing list
>>> dri-devel@lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> http://blog.ffwll.ch

\
 
 \ /
  Last update: 2016-04-25 21:01    [W:0.113 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site