lkml.org 
[lkml]   [2016]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 12/41] Documentation: dt: input: fix spelling mistakes
    On Mon, Apr 25, 2016 at 01:24:09AM +0100, Eric Engestrom wrote:
    > Signed-off-by: Eric Engestrom <eric@engestrom.ch>

    Applied, thanks.

    Rob

    > ---
    > Documentation/devicetree/bindings/input/ads7846.txt | 2 +-
    > Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +-
    > 2 files changed, 2 insertions(+), 2 deletions(-)
    >
    > diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
    > index c6cfe2e..9fc47b0 100644
    > --- a/Documentation/devicetree/bindings/input/ads7846.txt
    > +++ b/Documentation/devicetree/bindings/input/ads7846.txt
    > @@ -29,7 +29,7 @@ Optional properties:
    > ti,vref-delay-usecs vref supply delay in usecs, 0 for
    > external vref (u16).
    > ti,vref-mv The VREF voltage, in millivolts (u16).
    > - Set to 0 to use internal refernce
    > + Set to 0 to use internal references
    > (ADS7846).
    > ti,keep-vref-on set to keep vref on for differential
    > measurements as well
    > diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
    > index cdf05f9..abfcab3 100644
    > --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
    > +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
    > @@ -15,7 +15,7 @@ Optional properties:
    > - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
    > - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
    > between 1 and 4096. It is the ratio between the internal reference voltage
    > - and the measured voltage after the plate was precharged. Resistence between
    > + and the measured voltage after the plate was precharged. Resistance between
    > plates and therefore the voltage decreases with pressure so that a smaller
    > value is equivalent to a higher pressure.
    > - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
    > --
    > 2.8.0
    >

    \
     
     \ /
      Last update: 2016-04-25 16:21    [W:4.232 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site