lkml.org 
[lkml]   [2016]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] printk, allow different timestamps for printk.time
Date
Over the past years I've seen many reports of bugs that include
time-stamped kernel logs (enabled when CONFIG_PRINTK_TIME=y or
print.time=1 is specified as a kernel parameter) that do not align
with either external time stamped logs or /var/log/messages. This
also makes determining the time of a failure difficult in cases where
/var/log/messages is unavailable.

For example,

[root@intel-wildcatpass-06 ~]# date; echo "Hello!" > /dev/kmsg ; date
Thu Dec 17 13:58:31 EST 2015
Thu Dec 17 13:58:31 EST 2015

which displays

[83973.768912] Hello!

on the serial console.

Running a script to convert this to the stamped time,

[root@intel-wildcatpass-06 ~]# ./human.sh | tail -1
[Thu Dec 17 13:59:57 2015] Hello!

which is already off by 1 minute and 26 seconds off after ~24 hours of
uptime.

This occurs because the time stamp is obtained from a call to
local_clock() which (on x86) is a direct call to the hardware. These
hardware clock reads are not modified by the standard ntp or ptp protocol,
while the other timestamps are, and that results in situations external
time sources are further and further offset from the kernel log
timestamps.

This patch introduces printk.time=[0-3] allowing a user to specify an adjusted
clock to use with printk timestamps. The hardware clock, or the existing
functionality, is preserved by default.

Real clock & 32-bit systems: Selecting the real clock printk timestamp may
lead to unlikely situations where a timestamp is wrong because the real time
offset is read without the protection of a sequence lock in the call to
ktime_get_log_ts() in printk_get_ts().

[v2]: use NMI safe timekeeping access functions
[v3]: use tglx's ktime_get_log_ts() suggestion to get monotonic & real clocks
[v4]: Fix kernel parameters
[v5]: Modify configs to accept [0-3]
[v6]: Implement Kconfig changes from Petr Mladek, fix CONFIG_PRINTK_TIME=0
and dmesg bug

Cc: Cc: Petr Mladek <pmladek@suse.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Xunlei Pang <pang.xunlei@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
---
Documentation/kernel-parameters.txt | 6 ++++--
include/linux/timekeeping.h | 1 +
kernel/printk/printk.c | 35 +++++++++++++++++++++++++++++++++--
kernel/time/timekeeping.c | 13 +++++++++++++
lib/Kconfig.debug | 7 ++++---
5 files changed, 55 insertions(+), 7 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 79c3e28..95cd7fe 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3111,8 +3111,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Format: <bool> (1/Y/y=enable, 0/N/n=disable)
default: disabled

- printk.time= Show timing data prefixed to each printk message line
- Format: <string> (1/Y/y=enable, 0/N/n=disable)
+ printk.time= Show timestamp prefixed to each printk message line
+ Format: <string>
+ (0/N/n = disable, 1/Y/y = local clock,
+ 2 = monotonic clock, 3 = real clock)

processor.max_cstate= [HW,ACPI]
Limit processor to maximum C-state
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 96f37be..9b57867 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -233,6 +233,7 @@ static inline u64 ktime_get_raw_ns(void)

extern u64 ktime_get_mono_fast_ns(void);
extern u64 ktime_get_raw_fast_ns(void);
+extern u64 ktime_get_log_ts(u64 *offset_real);

/*
* Timespec interfaces utilizing the ktime based ones
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 18dee96..48a8214 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -424,6 +424,8 @@ static u32 truncate_msg(u16 *text_len, u16 *trunc_msg_len,
return msg_used_size(*text_len + *trunc_msg_len, 0, pad_len);
}

+static u64 printk_get_ts(void);
+
/* insert record into the buffer, discard old ones, update heads */
static int log_store(int facility, int level,
enum log_flags flags, u64 ts_nsec,
@@ -472,7 +474,7 @@ static int log_store(int facility, int level,
if (ts_nsec > 0)
msg->ts_nsec = ts_nsec;
else
- msg->ts_nsec = local_clock();
+ msg->ts_nsec = printk_get_ts();
memset(log_dict(msg) + dict_len, 0, pad_len);
msg->len = size;

@@ -1042,6 +1044,12 @@ static inline void boot_delay_msec(int level)

static int printk_time = CONFIG_PRINTK_TIME;

+/*
+ * Real clock & 32-bit systems: Selecting the real clock printk timestamp may
+ * lead to unlikely situations where a timestamp is wrong because the real time
+ * offset is read without the protection of a sequence lock in the call to
+ * ktime_get_log_ts() in printk_get_ts() below.
+ */
static int printk_time_param_set(const char *val,
const struct kernel_param *kp)
{
@@ -1063,6 +1071,14 @@ static int printk_time_param_set(const char *val,
case 'y':
printk_time = 1;
break;
+ /* 2 = monotonic clock */
+ case '2':
+ printk_time = 2;
+ break;
+ /* 3 = real clock */
+ case '3':
+ printk_time = 3;
+ break;
default:
pr_warn("printk: invalid timestamp value\n");
return -EINVAL;
@@ -1080,6 +1096,21 @@ static struct kernel_param_ops printk_time_param_ops = {

module_param_cb(time, &printk_time_param_ops, &printk_time, S_IRUGO);

+static u64 printk_get_ts(void)
+{
+ u64 mono, offset_real;
+
+ if (printk_time <= 1)
+ return local_clock();
+
+ mono = ktime_get_log_ts(&offset_real);
+
+ if (printk_time == 2)
+ return mono;
+
+ return mono + offset_real;
+}
+
static size_t print_time(u64 ts, char *buf)
{
unsigned long rem_nsec;
@@ -1598,7 +1629,7 @@ static bool cont_add(int facility, int level, const char *text, size_t len)
cont.facility = facility;
cont.level = level;
cont.owner = current;
- cont.ts_nsec = local_clock();
+ cont.ts_nsec = printk_get_ts();
cont.flags = 0;
cont.cons = 0;
cont.flushed = false;
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 479d25c..feb1995 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -43,6 +43,7 @@ static struct {

static DEFINE_RAW_SPINLOCK(timekeeper_lock);
static struct timekeeper shadow_timekeeper;
+static int timekeeping_active;

/**
* struct tk_fast - NMI safe timekeeper
@@ -419,6 +420,16 @@ u64 ktime_get_raw_fast_ns(void)
}
EXPORT_SYMBOL_GPL(ktime_get_raw_fast_ns);

+u64 ktime_get_log_ts(u64 *offset_real)
+{
+ *offset_real = ktime_to_ns(tk_core.timekeeper.offs_real);
+
+ if (timekeeping_active)
+ return ktime_get_mono_fast_ns();
+ else
+ return local_clock();
+}
+
/* Suspend-time cycles value for halted fast timekeeper. */
static cycle_t cycles_at_suspend;

@@ -1503,6 +1514,8 @@ void __init timekeeping_init(void)

write_seqcount_end(&tk_core.seq);
raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
+
+ timekeeping_active = 1;
}

/* time in seconds when suspend began for persistent clock */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 774aa38..3197262 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1,8 +1,8 @@
menu "printk and dmesg options"

config PRINTK_TIME
- int "Show timing information on printks (0-1)"
- range 0 1
+ int "Show timing information on printks (0-3)"
+ range 0 3
default "0"
depends on PRINTK
help
@@ -13,7 +13,8 @@ config PRINTK_TIME
The timestamp is always recorded internally, and exported
to /dev/kmsg. This flag just specifies if the timestamp should
be included, not that the timestamp is recorded. 0 disables the
- timestamp and 1 uses the local clock.
+ timestamp and 1 uses the local clock, 2 uses the monotonic clock, and
+ 3 uses real clock.

The behavior is also controlled by the kernel command line
parameter printk.time=1. See Documentation/kernel-parameters.txt
--
1.7.9.3
\
 
 \ /
  Last update: 2016-04-22 14:21    [W:0.129 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site