Messages in this thread | | | Subject | Re: [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies | From | Srinivas Kandagatla <> | Date | Fri, 22 Apr 2016 10:11:55 +0100 |
| |
On 19/04/16 20:10, Stephen Boyd wrote: > On 04/12/2016 02:33 AM, Srinivas Kandagatla wrote: >> This patch adds pmic regulator supplies connected on the board. >> Rest of the invidual regulators would be added as and when required by >> the devices. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> >> --- >> arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 62 +++++++++++++++++++++++++ >> 1 file changed, 62 insertions(+) >> >> diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts >> index 57d4500..6695b00 100644 >> --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts >> +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts >> @@ -9,7 +9,69 @@ >> serial1 = &gsbi1_serial; >> }; >> >> + regulators { >> + compatible = "simple-bus"; >> + vph: regulator-fixed@1 { >> + compatible = "regulator-fixed"; >> + regulator-min-microvolt = <4500000>; >> + regulator-max-microvolt = <4500000>; >> + regulator-name = "VPH"; >> + regulator-type = "voltage"; >> + regulator-boot-on; >> + }; >> + }; > > Just curious why we added the vph supply? Is that for some framework > requirement? We haven't done this on other boards, although we probably > should if there's a good reason for it.
This is an on board 12V TO 4.5V @5.5A DC/DC convertor for PMIC VPH power. Yep we should do something similar on the other boards too. Without this probably you would notice some error messages from rpm_regulators about missing supply nodes.
thanks, srini
>
| |