lkml.org 
[lkml]   [2016]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/i915/vlv: Enable polling when we shut off all power domains
Date
Unfortunately HPD isn't functional once we shut off all of the power
domains. Unfortunately we can end up shutting off all of the power
domains in any situation where we don't have any monitors connected,
essentially breaking hpd for the user unless they reboot with one of
their monitors connected.

In addition, enabling polling has to be done in it's own seperate
worker. The reason for this is that vlv_display_power_well_init/deinit()
will get called during the DRM polling process and try to grab the locks
required for turning on polling and cause a deadlock.

This breaks runtime PM due to the constant wakeups, so this is more of a
temporary workaround then a solution.

Signed-off-by: Lyude <cpaul@redhat.com>
Cc: stable@vger.kernel.org
---
drivers/gpu/drm/i915/intel_display.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 551541b303..f644814 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14531,7 +14531,22 @@ static void intel_setup_outputs(struct drm_device *dev)
intel_dp_is_edp(dev, PORT_C))
intel_dp_init(dev, VLV_DP_C, PORT_C);

- if (IS_CHERRYVIEW(dev)) {
+ if (IS_VALLEYVIEW(dev)) {
+ struct intel_connector *connector;
+
+ /*
+ * On vlv, turning off all of the power domains results
+ * in a loss of hpd, enable polling on all of the
+ * connectors so that drm polls them when this happens
+ */
+ drm_modeset_lock(&dev->mode_config.connection_mutex,
+ NULL);
+ for_each_intel_connector(dev, connector) {
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT;
+ }
+ drm_modeset_unlock(&dev->mode_config.connection_mutex);
+ } else if (IS_CHERRYVIEW(dev)) {
/* eDP not supported on port D, so don't check VBT */
if (I915_READ(CHV_HDMID) & SDVO_DETECTED)
intel_hdmi_init(dev, CHV_HDMID, PORT_D);
--
2.5.5
\
 
 \ /
  Last update: 2016-04-21 18:01    [W:0.023 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site