lkml.org 
[lkml]   [2016]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 2/2] dmaengine: vdma: Add clock support
Date
Hi Soren,

> -----Original Message-----
> From: Sören Brinkmann [mailto:soren.brinkmann@xilinx.com]
> Sent: Wednesday, April 20, 2016 8:06 PM
> To: Appana Durga Kedareswara Rao <appanad@xilinx.com>
> Cc: robh+dt@kernel.org; pawel.moll@arm.com; mark.rutland@arm.com;
> ijc+devicetree@hellion.org.uk; galak@codeaurora.org; Michal Simek
> <michals@xilinx.com>; vinod.koul@intel.com; dan.j.williams@intel.com;
> Appana Durga Kedareswara Rao <appanad@xilinx.com>;
> moritz.fischer@ettus.com; laurent.pinchart@ideasonboard.com;
> luis@debethencourt.com; Anirudha Sarangi <anirudh@xilinx.com>; Punnaiah
> Choudary Kalluri <punnaia@xilinx.com>; Shubhrajyoti Datta
> <shubhraj@xilinx.com>; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> dmaengine@vger.kernel.org
> Subject: Re: [PATCH v2 2/2] dmaengine: vdma: Add clock support
>
> On Wed, 2016-04-20 at 17:13:19 +0530, Kedareswara rao Appana wrote:
> > Added basic clock support. The clocks are requested at probe and
> > released at remove.
> >
> > Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> > ---
> > Changes for v2:
> > --> None.
> >
> > drivers/dma/xilinx/xilinx_vdma.c | 56
> > ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 56 insertions(+)
> >
> > diff --git a/drivers/dma/xilinx/xilinx_vdma.c
> > b/drivers/dma/xilinx/xilinx_vdma.c
> > index 70caea6..d526029 100644
> > --- a/drivers/dma/xilinx/xilinx_vdma.c
> > +++ b/drivers/dma/xilinx/xilinx_vdma.c
> > @@ -44,6 +44,7 @@
> > #include <linux/of_platform.h>
> > #include <linux/of_irq.h>
> > #include <linux/slab.h>
> > +#include <linux/clk.h>
> >
> > #include "../dmaengine.h"
> >
> > @@ -352,6 +353,8 @@ struct xilinx_dma_chan {
> > * @flush_on_fsync: Flush on frame sync
> > * @ext_addr: Indicates 64 bit addressing is supported by dma device
> > * @dmatype: DMA ip type
> > + * @clks: pointer to array of clocks
> > + * @numclks: number of clocks available
> > */
> > struct xilinx_dma_device {
> > void __iomem *regs;
> > @@ -362,6 +365,8 @@ struct xilinx_dma_device {
> > u32 flush_on_fsync;
> > bool ext_addr;
> > enum xdma_ip_type dmatype;
> > + struct clk **clks;
> > + int numclks;
> > };
> >
> > /* Macros */
> > @@ -1731,6 +1736,26 @@ int xilinx_vdma_channel_set_config(struct
> > dma_chan *dchan, } EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
> >
> > +static int xdma_clk_init(struct xilinx_dma_device *xdev, bool enable)
> > +{
> > + int i = 0, ret;
> > +
> > + for (i = 0; i < xdev->numclks; i++) {
> > + if (enable) {
> > + ret = clk_prepare_enable(xdev->clks[i]);
> > + if (ret) {
> > + dev_err(xdev->dev,
> > + "failed to enable the axidma clock\n");
> > + return ret;
> > + }
> > + } else {
> > + clk_disable_unprepare(xdev->clks[i]);
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > /* -----------------------------------------------------------------------------
> > * Probe and remove
> > */
> > @@ -1919,6 +1944,7 @@ static int xilinx_dma_probe(struct platform_device
> *pdev)
> > struct resource *io;
> > u32 num_frames, addr_width;
> > int i, err;
> > + const char *str;
> >
> > /* Allocate and initialize the DMA engine structure */
> > xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL); @@
> > -1965,6 +1991,32 @@ static int xilinx_dma_probe(struct platform_device
> *pdev)
> > /* Set the dma mask bits */
> > dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
> >
> > + xdev->numclks = of_property_count_strings(pdev->dev.of_node,
> > + "clock-names");
> > + if (xdev->numclks > 0) {
> > + xdev->clks = devm_kmalloc_array(&pdev->dev, xdev->numclks,
> > + sizeof(struct clk *),
> > + GFP_KERNEL);
> > + if (!xdev->clks)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < xdev->numclks; i++) {
> > + of_property_read_string_index(pdev->dev.of_node,
> > + "clock-names", i, &str);
> > + xdev->clks[i] = devm_clk_get(xdev->dev, str);
> > + if (IS_ERR(xdev->clks[i])) {
> > + if (PTR_ERR(xdev->clks[i]) == -ENOENT)
> > + xdev->clks[i] = NULL;
> > + else
> > + return PTR_ERR(xdev->clks[i]);
> > + }
> > + }
> > +
> > + err = xdma_clk_init(xdev, true);
> > + if (err)
> > + return err;
> > + }
>
> I guess this works, but the relation to the binding is a little loose, IMHO. Instead
> of using the clock names from the binding this is just using whatever is provided
> in DT and enabling it. Also, all the clocks here are handled as optional feature,
> while binding - and I guess reality too - have them as mandatory.
> It would be nicer if the driver specifically asks for the clocks it needs and return
> an error if a mandatory clock is missing.

Here DMA channels are configurable I mean if user select only mm2s channel then we will have
Only 3 clocks. If user selects both mm2s and s2mm channels we will have 5 clocks.
That’s why reading the number of clocks from the clock-names property.

And also the AXI DMA/CDMA Ip support also getting added to this driver for those IP's also the clocks are configurable
For AXI DMA it is either 3 or 4 clocks and for AXI CDMA it is 2 clocks.

That's why I thought it is the proper solution.

If you have any better idea please let me know will try in that way...

Regards,
Kedar.
>
> Sören
\
 
 \ /
  Last update: 2016-04-20 17:21    [W:0.478 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site