lkml.org 
[lkml]   [2016]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/16] DTS for hi6220 and HiKey
Date
This patchset include dts changes for hi6220 SoC and HiKey board. These
patches apply well one by one on top of next-20160401.

To avoid merge conflicts with patches already ack'ed by maintainers,
I picked all hi6220/hikey dts related patches into this single patchset.
And they passed the tests on HiKey.

Patch 1~3 are from hi6220 cpuidle support. It has been reviewed and
ack'ed in maillist.
[PATCH v2 RESEND 0/4] arm64: Hi6220: enable CPU idle states:
http://archive.arm.linux.org.uk/lurker/message/20160121.105346.7d3b0470.en.html

Patch 4~6 are for hi6220 gpio, pinctl and spi configurations respectively.

Patch 7 adds hi6220 i2c nodes, and
patch 8 enables them for hikey board usage.

Patch 9 adds add hi6220 usb node. It has been sent to maillist.
[PATCH] arm64: dts: add hi6220 usb node
http://thread.gmane.org/gmane.linux.drivers.devicetree/146062
http://thread.gmane.org/gmane.linux.drivers.devicetree/144335/focus=134022

Patch 10 and 11 are from hi6220 mailbox support. It has been reviewed and
ack'ed in maillist.
[PATCH v7 RESEND 0/4] mailbox: hisilicon: add Hi6220 mailbox driver
http://thread.gmane.org/gmane.linux.kernel/2152759/focus=2152768

Patch 12 adds pinctrl to uart ports in SoC and enables them for HiKey board.
Patch 13 adds gpio LEDs device nodes.

Patch 14 adds hi655x pmic dts node and regulator support.
[PATCH v8 5/5] arm64: dts: hisilicon: Add hi655x pmic dts node
http://thread.gmane.org/gmane.linux.kernel/2151688

Patch 15 adds dwmmc nodes description for hi6220. It refers to two LDO's
which are defined above.
Patch 16 adds wifi device node (TI's wl1835) for HiKey board.


v2:
- picked hi655x pmic dts node.
- removed dw_mmc resets property, as it is still under review.
- add 'non-removable' into dw_mmc2 for wifi

Chen Feng (1):
arm64: dts: hikey: Add hi655x pmic dts node

Guodong Xu (4):
arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine
boards
arm64: dts: hi6220: add pinctrl for uarts and enable them
arm64: dts: add LED nodes for hi6220-hikey
arm64: dts: add wifi nodes support for hi6220-hikey

Leo Yan (5):
arm64: dts: Reserve memory regions for hi6220
arm64: dts: add sp804 timer node for Hi6220
arm64: dts: enable idle states for Hi6220
arm64: dts: add mailbox node for Hi6220
arm64: dts: add Hi6220's stub clock node

Xinwei Kong (2):
arm64: dts: add all hi6220 i2c nodes
arm64: dts: add dwmmc nodes for hi6220

Zhangfei Gao (1):
arm64: dts: add hi6220 usb node

Zhong Kaihua (3):
arm64: dts: Add Hi6220 gpio configuration nodes
arm64: dts: add Hi6220 pinctrl configuration nodes
arm64: dts: add Hi6220 spi configuration nodes

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 198 ++++++-
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 582 +++++++++++++++++++
arch/arm64/boot/dts/hisilicon/hikey-gpio.dtsi | 607 +++++++++++++++++++
arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi | 705 +++++++++++++++++++++++
include/dt-bindings/pinctrl/hisi.h | 59 ++
5 files changed, 2147 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey-gpio.dtsi
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
create mode 100644 include/dt-bindings/pinctrl/hisi.h

--
1.9.1

\
 
 \ /
  Last update: 2016-04-02 12:21    [W:0.177 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site