lkml.org 
[lkml]   [2016]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 09/14] USB: ch341: add support for RTS/CTS flow control
Date
v2: use correct flag variable

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
---
drivers/usb/serial/ch341.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 58309d1..d956f75 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -69,6 +69,7 @@
#define CH341_REQ_READ_REG 0x95
#define CH341_REG_BREAK1 0x05
#define CH341_REG_LCR 0x18
+#define CH341_REG_RTSCTS 0x27
#define CH341_NBREAK_BITS_REG1 0x01

#define CH341_LCR_ENABLE_RX 0x80
@@ -403,6 +404,16 @@ static void ch341_set_termios(struct tty_struct *tty,

ch341_set_handshake(port->serial->dev, priv->line_control);

+ if (cflag & CRTSCTS) {
+ r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
+ CH341_REG_RTSCTS | ((uint16_t)CH341_REG_RTSCTS << 8),
+ 0x0101);
+ if (r < 0) {
+ dev_err(&port->dev, "%s - USB control write error (%d)\n",
+ __func__, r);
+ tty->termios.c_cflag &= ~CRTSCTS;
+ }
+ }
}

static void ch341_break_ctl(struct tty_struct *tty, int break_state)
--
1.9.1
\
 
 \ /
  Last update: 2016-04-02 19:41    [W:0.128 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site