lkml.org 
[lkml]   [2016]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH next v2 1/2] PCI: keystone: add pci error irq handler
Hi Murali,

On Mon, Apr 11, 2016 at 10:50:30AM -0400, Murali Karicheri wrote:
> Keystone PCI hardware generates error interrupts at RC using platform
> irq instead of standard msi/legacy irq. Add a simple error handler that
> logs the fatal interrupt status to the console.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>
> Cc: Bjorn Helgaas <bhelgaas@google.com>

I applied this with minor changes to pci/host-keystone for v4.7.
See below:

> +bool ks_dw_pcie_handle_error_irq(struct device *dev, void __iomem *reg_base)
> +{
> + u32 status;
> + bool ret = false;
> +
> + status = readl(reg_base + ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL;
> + if (status) {
> + /* The PCIESS interrupt status buts are "write 1 to clear" */
> + if (status & ERR_FATAL_IRQ)
> + dev_err(dev, "PCIE fatal error detected\n");
> +
> + /* ack the irq event. */
> + writel(status, reg_base + ERR_IRQ_STATUS);
> + ret = true;
> + }
> + return ret;
> +}

It seems pointless to me to return true/false here and then:

> +static irqreturn_t pcie_err_irq_handler(int irq, void *priv)
> +{
> + struct keystone_pcie *ks_pcie = priv;
> +
> + if (ks_dw_pcie_handle_error_irq(ks_pcie->pp.dev, ks_pcie->va_app_base))
> + return IRQ_HANDLED;
> +
> + return IRQ_NONE;
> +}

convert the true/false to IRQ_HANDLED/IRQ_NONE here. So I changed
ks_dw_pcie_handle_error_irq() to return IRQ_HANDLED/IRQ_NONE directly,
resulting in the patch below.

This is applied to pci/host-keystone for v4.7.


commit 7be92716c1aa40f5690e6a5f01fc0d385dd72303
Author: Murali Karicheri <m-karicheri2@ti.com>
Date: Mon Apr 11 10:50:30 2016 -0400

PCI: keystone: Add error IRQ handler

Keystone PCI hardware generates error interrupts at RC using a platform IRQ
instead of a standard MSI or legacy IRQ. Add a simple error handler that
logs the fatal interrupt status to the console.

[bhelgaas: tidy comments, return irqreturn_t directly]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>

diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 54eae29..d08a4d5 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -56,6 +56,7 @@ Optional properties:-
phy-names: name of the Generic Keystine SerDes phy for PCI
- If boot loader already does PCI link establishment, then phys and
phy-names shouldn't be present.
+ interrupts: platform interrupt for error interrupts.

Designware DT Properties not applicable for Keystone PCI

diff --git a/drivers/pci/host/pci-keystone-dw.c b/drivers/pci/host/pci-keystone-dw.c
index 6153853..4151509 100644
--- a/drivers/pci/host/pci-keystone-dw.c
+++ b/drivers/pci/host/pci-keystone-dw.c
@@ -14,6 +14,7 @@

#include <linux/irq.h>
#include <linux/irqdomain.h>
+#include <linux/irqreturn.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_pci.h>
@@ -53,6 +54,21 @@
#define IRQ_STATUS 0x184
#define MSI_IRQ_OFFSET 4

+/* Error IRQ bits */
+#define ERR_AER BIT(5) /* ECRC error */
+#define ERR_AXI BIT(4) /* AXI tag lookup fatal error */
+#define ERR_CORR BIT(3) /* Correctable error */
+#define ERR_NONFATAL BIT(2) /* Non-fatal error */
+#define ERR_FATAL BIT(1) /* Fatal error */
+#define ERR_SYS BIT(0) /* System (fatal, non-fatal, or correctable) */
+#define ERR_IRQ_ALL (ERR_AER | ERR_AXI | ERR_CORR | \
+ ERR_NONFATAL | ERR_FATAL | ERR_SYS)
+#define ERR_FATAL_IRQ (ERR_FATAL | ERR_AXI)
+#define ERR_IRQ_STATUS_RAW 0x1c0
+#define ERR_IRQ_STATUS 0x1c4
+#define ERR_IRQ_ENABLE_SET 0x1c8
+#define ERR_IRQ_ENABLE_CLR 0x1cc
+
/* Config space registers */
#define DEBUG0 0x728

@@ -243,6 +259,28 @@ void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset)
writel(offset, ks_pcie->va_app_base + IRQ_EOI);
}

+void ks_dw_pcie_enable_error_irq(void __iomem *reg_base)
+{
+ writel(ERR_IRQ_ALL, reg_base + ERR_IRQ_ENABLE_SET);
+}
+
+irqreturn_t ks_dw_pcie_handle_error_irq(struct device *dev,
+ void __iomem *reg_base)
+{
+ u32 status;
+
+ status = readl(reg_base + ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL;
+ if (!status)
+ return IRQ_NONE;
+
+ if (status & ERR_FATAL_IRQ)
+ dev_err(dev, "fatal error (status %#010x)\n", status);
+
+ /* Ack the IRQ; status bits are RW1C */
+ writel(status, reg_base + ERR_IRQ_STATUS);
+ return IRQ_HANDLED;
+}
+
static void ks_dw_pcie_ack_legacy_irq(struct irq_data *d)
{
}
diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c
index b71f55b..6868918 100644
--- a/drivers/pci/host/pci-keystone.c
+++ b/drivers/pci/host/pci-keystone.c
@@ -15,6 +15,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/msi.h>
@@ -226,6 +227,9 @@ static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
ks_pcie);
}
}
+
+ if (ks_pcie->error_irq > 0)
+ ks_dw_pcie_enable_error_irq(ks_pcie->va_app_base);
}

/*
@@ -289,6 +293,14 @@ static struct pcie_host_ops keystone_pcie_host_ops = {
.scan_bus = ks_dw_pcie_v3_65_scan_bus,
};

+static irqreturn_t pcie_err_irq_handler(int irq, void *priv)
+{
+ struct keystone_pcie *ks_pcie = priv;
+
+ return ks_dw_pcie_handle_error_irq(ks_pcie->pp.dev,
+ ks_pcie->va_app_base);
+}
+
static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,
struct platform_device *pdev)
{
@@ -309,6 +321,22 @@ static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,
return ret;
}

+ /*
+ * Index 0 is the platform interrupt for error interrupt
+ * from RC. This is optional.
+ */
+ ks_pcie->error_irq = irq_of_parse_and_map(ks_pcie->np, 0);
+ if (ks_pcie->error_irq <= 0)
+ dev_info(&pdev->dev, "no error IRQ defined\n");
+ else {
+ if (request_irq(ks_pcie->error_irq, pcie_err_irq_handler,
+ IRQF_SHARED, "pcie-error-irq", ks_pcie) < 0) {
+ dev_err(&pdev->dev, "failed to request error IRQ %d\n",
+ ks_pcie->error_irq);
+ return ret;
+ }
+ }
+
pp->root_bus_nr = -1;
pp->ops = &keystone_pcie_host_ops;
ret = ks_dw_pcie_host_init(ks_pcie, ks_pcie->msi_intc_np);
@@ -376,6 +404,7 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
devm_release_mem_region(dev, res->start, resource_size(res));

pp->dev = dev;
+ ks_pcie->np = node;
platform_set_drvdata(pdev, ks_pcie);
ks_pcie->clk = devm_clk_get(dev, "pcie");
if (IS_ERR(ks_pcie->clk)) {
diff --git a/drivers/pci/host/pci-keystone.h b/drivers/pci/host/pci-keystone.h
index f0944e8..a5b0cb2 100644
--- a/drivers/pci/host/pci-keystone.h
+++ b/drivers/pci/host/pci-keystone.h
@@ -29,6 +29,9 @@ struct keystone_pcie {
int msi_host_irqs[MAX_MSI_HOST_IRQS];
struct device_node *msi_intc_np;
struct irq_domain *legacy_irq_domain;
+ struct device_node *np;
+
+ int error_irq;

/* Application register space */
void __iomem *va_app_base;
@@ -42,6 +45,9 @@ phys_addr_t ks_dw_pcie_get_msi_addr(struct pcie_port *pp);
/* Keystone specific PCI controller APIs */
void ks_dw_pcie_enable_legacy_irqs(struct keystone_pcie *ks_pcie);
void ks_dw_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie, int offset);
+void ks_dw_pcie_enable_error_irq(void __iomem *reg_base);
+irqreturn_t ks_dw_pcie_handle_error_irq(struct device *dev,
+ void __iomem *reg_base);
int ks_dw_pcie_host_init(struct keystone_pcie *ks_pcie,
struct device_node *msi_intc_np);
int ks_dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
\
 
 \ /
  Last update: 2016-04-20 03:21    [W:0.056 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site