lkml.org 
[lkml]   [2016]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies
From
Date
On 04/12/2016 02:33 AM, Srinivas Kandagatla wrote:
> This patch adds pmic regulator supplies connected on the board.
> Rest of the invidual regulators would be added as and when required by
> the devices.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 62 +++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
> index 57d4500..6695b00 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
> @@ -9,7 +9,69 @@
> serial1 = &gsbi1_serial;
> };
>
> + regulators {
> + compatible = "simple-bus";
> + vph: regulator-fixed@1 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <4500000>;
> + regulator-max-microvolt = <4500000>;
> + regulator-name = "VPH";
> + regulator-type = "voltage";
> + regulator-boot-on;
> + };
> + };

Just curious why we added the vph supply? Is that for some framework
requirement? We haven't done this on other boards, although we probably
should if there's a good reason for it.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2016-04-19 21:21    [W:0.075 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site