lkml.org 
[lkml]   [2016]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4 v6] drm: Add DT bindings documentation for ARC PGU display controller
Date
This add DT bindings documentation for ARC PGU display controller.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Acked-by: Rob Herring <robh@kernel.org>
---

No changes v5 -> v6.

Changes v4 -> v5: (addressing Rob's comment)
* Added Rob's acked-by
* Remove "encoder-slave" from the example as well.
Now only "pgu" node is mentioned in the example.

Changes v3 -> v4: (addressing Rob's comments)
* Removed "encoder-slave" from required properties
* Removed "0x" from node names

Changes v2 -> v3:
* Reverted back to initial larger version of example
with minor fixes (thanks Rob for spotting those).

Changes v1 -> v2:
* Removed everything except PGU node itself.

.../devicetree/bindings/display/snps,arcpgu.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt

diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 0000000..c5c7dfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,35 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+ - compatible: "snps,arcpgu"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For ARC PGU it should contain:
+ - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+ - port: The PGU connection to an encoder chip.
+
+Example:
+
+/ {
+ ...
+
+ pgu@XXXXXXXX {
+ compatible = "snps,arcpgu";
+ reg = <0xXXXXXXXX 0x400>;
+ clocks = <&clock_node>;
+ clock-names = "pxlclk";
+
+ port {
+ pgu_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+};
--
2.5.5
\
 
 \ /
  Last update: 2016-04-19 15:41    [W:0.104 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site