lkml.org 
[lkml]   [2016]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] phy: add generic function to support ksetting support
On 15/04/16 04:50, Fugang Duan wrote:
> From: Philippe Reynes<tremyfr@gmail.com> Sent: Friday, April 15, 2016 6:35 AM
>> To: davem@davemloft.net; decot@googlers.com; f.fainelli@gmail.com; Fugang
>> Duan<fugang.duan@nxp.com>
>> Cc: linux-kernel@vger.kernel.org; netdev@vger.kernel.org; Philippe Reynes
>> <tremyfr@gmail.com>
>> Subject: [PATCH 2/3] phy: add generic function to support ksetting support
>>
>> The old ethtool api (get_setting and set_setting) has generic phy functions
>> phy_ethtool_sset and phy_ethtool_gset.
>> To supprt the new ethtool api (get_link_ksettings and set_link_ksettings), we
>> add generic phy function phy_ethtool_ksettings_get and
>> phy_ethtool_ksettings_set.
>>
>> Signed-off-by: Philippe Reynes<tremyfr@gmail.com>
>> ---
>> drivers/net/phy/phy.c | 81
>> +++++++++++++++++++++++++++++++++++++++++++++++++
>> include/linux/phy.h | 4 ++
>> 2 files changed, 85 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index
>> 5590b9c..6f221c8 100644
>> --- a/drivers/net/phy/phy.c
>> +++ b/drivers/net/phy/phy.c
>> @@ -362,6 +362,60 @@ int phy_ethtool_sset(struct phy_device *phydev,
>> struct ethtool_cmd *cmd) } EXPORT_SYMBOL(phy_ethtool_sset);
>>
>> +int phy_ethtool_ksettings_set(struct phy_device *phydev,
>> + const struct ethtool_link_ksettings *cmd) {
>> + u8 autoneg = cmd->base.autoneg;
>> + u8 duplex = cmd->base.duplex;
>> + u32 speed = cmd->base.speed;
>> + u32 advertising;
>> +
>> + if (cmd->base.phy_address != phydev->mdio.addr)
>> + return -EINVAL;
>> +
>> + ethtool_convert_link_mode_to_legacy_u32(&advertising,
>> + cmd->link_modes.advertising);
>> +
>> + /* We make sure that we don't pass unsupported values in to the PHY */
>> + advertising&= phydev->supported;
>> +
>> + /* Verify the settings we care about. */
>> + if (autoneg != AUTONEG_ENABLE&& autoneg != AUTONEG_DISABLE)
>> + return -EINVAL;
>> +
>> + if (autoneg == AUTONEG_ENABLE&& advertising == 0)
>> + return -EINVAL;
>> +
>> + if (autoneg == AUTONEG_DISABLE&&
>> + ((speed != SPEED_1000&&
>> + speed != SPEED_100&&
>> + speed != SPEED_10) ||
>> + (duplex != DUPLEX_HALF&&
>> + duplex != DUPLEX_FULL)))
>> + return -EINVAL;
>> +
>> + phydev->autoneg = autoneg;
>> +
>> + phydev->speed = speed;
>> +
>> + phydev->advertising = advertising;
>> +
>> + if (autoneg == AUTONEG_ENABLE)
>> + phydev->advertising |= ADVERTISED_Autoneg;
>> + else
>> + phydev->advertising&= ~ADVERTISED_Autoneg;
>> +
>> + phydev->duplex = duplex;
>> +
>> + phydev->mdix = cmd->base.eth_tp_mdix_ctrl;
>> +
>> + /* Restart the PHY */
>> + phy_start_aneg(phydev);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(phy_ethtool_ksettings_set);
>> +
>> int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) {
>> cmd->supported = phydev->supported;
>> @@ -385,6 +439,33 @@ int phy_ethtool_gset(struct phy_device *phydev,
>> struct ethtool_cmd *cmd) } EXPORT_SYMBOL(phy_ethtool_gset);
>>
>> +int phy_ethtool_ksettings_get(struct phy_device *phydev,
>> + struct ethtool_link_ksettings *cmd) {
>> + ethtool_convert_legacy_u32_to_link_mode(cmd-
>>> link_modes.supported,
>> + phydev->supported);
>> +
>> + ethtool_convert_legacy_u32_to_link_mode(cmd-
>>> link_modes.advertising,
>> + phydev->advertising);
>> +
>> + ethtool_convert_legacy_u32_to_link_mode(cmd-
>>> link_modes.lp_advertising,
>> + phydev->lp_advertising);
>> +
>> + cmd->base.speed = phydev->speed;
>> + cmd->base.duplex = phydev->duplex;
>> + if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
>> + cmd->base.port = PORT_BNC;
>> + else
>> + cmd->base.port = PORT_MII;
>> +
>> + cmd->base.phy_address = phydev->mdio.addr;
>> + cmd->base.autoneg = phydev->autoneg;
>> + cmd->base.eth_tp_mdix_ctrl = phydev->mdix;
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(phy_ethtool_ksettings_get);
>> +
>> /**
>> * phy_mii_ioctl - generic PHY MII ioctl interface
>> * @phydev: the phy_device struct
>> diff --git a/include/linux/phy.h b/include/linux/phy.h index 2abd791..be3f83b
>> 100644
>> --- a/include/linux/phy.h
>> +++ b/include/linux/phy.h
>> @@ -805,6 +805,10 @@ void phy_start_machine(struct phy_device *phydev);
>> void phy_stop_machine(struct phy_device *phydev); int
>> phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); int
>> phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
>> +int phy_ethtool_ksettings_get(struct phy_device *phydev,
>> + struct ethtool_link_ksettings *cmd); int
>> +phy_ethtool_ksettings_set(struct phy_device *phydev,
>> + const struct ethtool_link_ksettings *cmd);
>> int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); int
>> phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct
>> phy_device *phydev);
>> --
>> 1.7.4.4
>
> It seems fine. There have many drivers need to update .set_settings/. get_settings, not only fsl fec driver.

Yes, a lot a drivers needs to be updated. Right now, I've only updated the fec.
If everybody agree, I can replace them.

> And whether there still need to keep the old interface in phy.c driver ?


I think we could remove the old interface when all the drivers would have moved to the new interface.

> Regards,
> Andy

Regards,
Philippe

\
 
 \ /
  Last update: 2016-04-16 01:21    [W:0.055 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site