lkml.org 
[lkml]   [2016]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 1/2] thermal: generic-adc: Add DT binding for ADC based thermal sensor
On Thu, Apr 14, 2016 at 08:11:17PM +0530, Laxman Dewangan wrote:
> Sometimes, thermal sensors like NCT thermistors are connected to
> the ADC channel. The temperature is read by reading the voltage
> across the sensor resistance via ADC and referring the lookup
> table for ADC value to temperature.
>
> Add DT binding doc for the ADC based thermal sensor driver to
> detail the DT property and provide the example for how to use it.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
>
> ---
> Changes from V1:
> - Make the lookup table to two dimensional instead of single array of linear
> step of temperature.
> - Remove detailing of IIO frameowrk and drivers.
> - Added proper braces, indenting and labels.
>
> Changes from V2:
> - Handle comment from Rob for detailing the first and second value of the array
> and remove @ in the node name.
>
> .../bindings/thermal/thermal-generic-adc.txt | 89 ++++++++++++++++++++++
> 1 file changed, 89 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt

Acked-by: Rob Herring <rob@kernel.org>

\
 
 \ /
  Last update: 2016-04-14 20:01    [W:0.065 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site