lkml.org 
[lkml]   [2016]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] regulator: st-flashss: Add a regulator driver for flashss vsense.
On Thu, Apr 14, 2016 at 04:15:34PM +0200, Giuseppe CAVALLARO wrote:
> On 4/13/2016 7:23 PM, Mark Brown wrote:

> /*
> * After resetting, the CONFIG_REG_PSW_<xxx> are set, this
> * means 3v3 operating voltage.
> * The CONFIG_LATCHED_PSW_<xxx> must be used to fix the previous
> * bits so operating at 1v8 if this is the real HW configuration
> * at boot time.
> */
> if (!(value & TOP_VSENSE_CONFIG_LATCHED_PSW_EMMC))
> value &= ~TOP_VSENSE_CONFIG_REG_PSW_EMMC;

That's definitely better.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-04-14 17:41    [W:0.530 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site