lkml.org 
[lkml]   [2016]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC] Is it a bug for nfs on udp6 mode or kernel?
From
Date
On Wed, 2016-04-13 at 19:28 +0800, Ding Tianhong wrote:
> Hi everyone:
>
> I have met this problem when I try to test udp6 for nfs connection, my environment is:
>
> Server:
> kernel: 4.1.15
> IP:xxxx::36/64
> MTU:1500
> Setting: /etc/exports:/home/nfs *(rw,sync,no_subtree_check,no_root_squash)
>
> Client:
> kernel: 4.1.18
> IP:xxxx::90/64
> MTU:1500
> command: mount -t nfs -o vers=3,proto=udp6,rsize=4096,wsize=4096 [xxxx::36]:/home/nfs /home/tmp
>
> I check the nfs parameter configuration, it looks fine and could work well for proto=tcp6.
>
> Then I have mount correctly and try to run the command "ls", it hang.
>
> When I use the rsize=1024 and wsize=1024 to mount, the problem disappeared, so I guess it is the problem for GSO or GRO for UDP。
>
> Then I try to debug the problem, first I tcpdump the package from cline to server, and found that
> the client have send readdirplus message to server correctly, and then the Server send a 4k package
> to client(the big package will frag to 4 package by GSO), till now it looks fine, and the Client Nic could
> receive the 4 skb then send to upper stack to ipv6 and udp, I found the incoming 4 package has been merged
> to one and send to upper stack just like sunrpc, but I try to open the rpc_debug, it looks that the rpc could
> not receive message.
>
>
> I built a simple demo to test the udp stack, use the client socket to send big package to server socket, it work well,
> so I think the udp is fine, maybe the bug is in sunrpc.
>
> The test is very simple, does any body met the same problem like me, thanks for any suggestion.
>
> Ding

Have you tried to disable UFO ?

ethtool -K eth... ufo off


\
 
 \ /
  Last update: 2016-04-13 18:41    [W:0.056 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site