lkml.org 
[lkml]   [2016]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RESEND 10/11] pwm: sti: Enable PWM Capture
On Wed, Mar 02, 2016 at 03:32:08PM +0000, Lee Jones wrote:
> Once all functionality is in place, we provide the means to
> enable PWM Capture. Here we are simply obtaining the
> associated regmap and twiddling the relevant enable register
> bits.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/pwm/pwm-sti.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
> index 8de9b4a..93cf20e 100644
> --- a/drivers/pwm/pwm-sti.c
> +++ b/drivers/pwm/pwm-sti.c
> @@ -279,6 +279,13 @@ static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> pwm->hwpwm);
> goto out;
> }
> +
> + ret = regmap_field_write(pc->pwm_cpt_en, 1);
> + if (ret) {
> + dev_err(dev, "failed to enable PWM capture:%d\n",
> + pwm->hwpwm);
> + goto out;
> + }

Should this perhaps be part of the driver's ->capture() implementation?
It seems redundant to have this logic enabled if we may never use it.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-04-12 13:01    [W:0.217 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site