lkml.org 
[lkml]   [2016]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
On Sun, Mar 27, 2016 at 05:51:13PM +0200, Maciej S. Szmigiero wrote:
> The official UDOO board kit has 7 and 15.6 inch touchscreen LCD panels
> as options.
>
> This patch adds support for 7 inch panel only, but the 15.6 inch one
> should be easy to add using the same regulator, backlight device and
> LVDS channel.
>
> Since this panel is an option for UDOO board it is disabled by default
> and can be enabled (for example) by the following U-Boot commands:
> fdt set backlight status okay
> fdt set panelchan status okay
> fdt set panel7 status okay
> fdt set touchscreenp7 status okay
>
> The LVDS channel is also disabled by default to avoid warning from its
> driver.
>
> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
> ---
> arch/arm/boot/dts/imx6qdl-udoo.dtsi | 96 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 96 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> index d3e54e40a017..6a0a7ddb59ae 100644
> --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> @@ -10,6 +10,13 @@
> */
>
> / {
> + aliases {
> + backlight = &backlight;
> + panelchan = &panelchan;
> + panel7 = &panel7;
> + touchscreenp7 = &touchscreenp7;
> + };
> +
> chosen {
> stdout-path = &uart2;
> };
> @@ -33,6 +40,14 @@
> startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
> gpio = <&gpio7 12 0>;
> };
> +
> + reg_panel: regulator@1 {
> + compatible = "regulator-fixed";
> + reg = <1>;
> + regulator-name = "lcd_panel";
> + enable-active-high;
> + gpio = <&gpio1 2 0>;
> + };
> };
>
> sound {
> @@ -46,6 +61,34 @@
> mux-int-port = <1>;
> mux-ext-port = <6>;
> };
> +
> + backlight: backlight {
> + compatible = "gpio-backlight";
> + gpios = <&gpio1 4 0>;
> + default-on;
> + status = "disabled";
> + };
> +
> + panel7: panel7 {
> + /*
> + * in reality it is a -20t (parallel) model,
> + * but with LVDS bridge chip attached,
> + * so it is equivalent to -19t model in drive
> + * characteristics
> + */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel>;
> + compatible = "urt,umsh-8596md-19t";

We generally let 'compatible' be the first property.

> + power-supply = <&reg_panel>;
> + backlight = <&backlight>;
> + status = "disabled";
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> };
>
> &fec {
> @@ -151,6 +194,27 @@
> MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> >;
> };
> +
> + pinctrl_panel: panelgrp {

Please sort pinctrl entries alphabetically.

> + fsl,pins = <
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1
> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_touchscreenp7: touchscreenp7grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70
> + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
> + >;
> + };
> };
> };
>
> @@ -189,3 +253,35 @@
> ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
> status = "okay";
> };
> +
> +&ldb {

Please try to keep the node alphabetically in label name.

Shawn

> + status = "okay";
> +
> + panelchan: lvds-channel@0 {
> + port@4 {
> + reg = <4>;
> +
> + lvds0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + touchscreenp7: touchscreenp7@55 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_touchscreenp7>;
> + compatible = "sitronix,st1232";
> + reg = <0x55>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <13 8>;
> + gpios = <&gpio1 15 0>;
> + status = "disabled";
> + };
> +};
>
>

\
 
 \ /
  Last update: 2016-04-11 17:01    [W:0.050 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site