lkml.org 
[lkml]   [2016]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.14 42/76] [media] adv7511: TX_EDID_PRESENT is still 1 after a disconnect
Date
3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hverkuil@xs4all.nl>

commit b339a72e04a62f0b1882c43492fc712f1176b3e6 upstream.

The V4L2_CID_TX_EDID_PRESENT control reports if an EDID is present.
The adv7511 however still reported the EDID present after disconnecting
the HDMI cable. Fix the logic regarding this control. And when the EDID
is disconnected also call ADV7511_EDID_DETECT to notify the bridge driver.
This was also missing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/media/i2c/adv7511.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)

--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511.c
@@ -827,12 +827,23 @@ static void adv7511_dbg_dump_edid(int lv
}
}

+static void adv7511_notify_no_edid(struct v4l2_subdev *sd)
+{
+ struct adv7511_state *state = get_adv7511_state(sd);
+ struct adv7511_edid_detect ed;
+
+ /* We failed to read the EDID, so send an event for this. */
+ ed.present = false;
+ ed.segment = adv7511_rd(sd, 0xc4);
+ v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+ v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x0);
+}
+
static void adv7511_edid_handler(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler);
struct v4l2_subdev *sd = &state->sd;
- struct adv7511_edid_detect ed;

v4l2_dbg(1, debug, sd, "%s:\n", __func__);

@@ -857,9 +868,7 @@ static void adv7511_edid_handler(struct
}

/* We failed to read the EDID, so send an event for this. */
- ed.present = false;
- ed.segment = adv7511_rd(sd, 0xc4);
- v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
+ adv7511_notify_no_edid(sd);
v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
}

@@ -930,7 +939,6 @@ static void adv7511_check_monitor_presen
/* update read only ctrls */
v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0);
v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0);
- v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);

if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) {
v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__);
@@ -960,6 +968,7 @@ static void adv7511_check_monitor_presen
}
adv7511_s_power(sd, false);
memset(&state->edid, 0, sizeof(struct adv7511_state_edid));
+ adv7511_notify_no_edid(sd);
}
}

@@ -1036,6 +1045,7 @@ static bool adv7511_check_edid_status(st
}
/* one more segment read ok */
state->edid.segments = segment + 1;
+ v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x1);
if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) {
/* Request next EDID segment */
v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments);
@@ -1055,7 +1065,6 @@ static bool adv7511_check_edid_status(st
ed.present = true;
ed.segment = 0;
state->edid_detect_counter++;
- v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, state->edid.segments ? 0x1 : 0x0);
v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
return ed.present;
}

\
 
 \ /
  Last update: 2016-04-10 22:01    [W:0.535 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site