lkml.org 
[lkml]   [2016]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/18] ARM: dts: vf610: add WKPU connection to GPIO
Date
Some GPIO have extended wake-up capabilities through the WKPU
module. Encode the connection between the GPIO's and the WKPU
interrupt sources in the device tree.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/vfxxx.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 335f4e5..869b230 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -383,6 +383,7 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
+ fsl,gpio-wakeup = <&wakeup 22 0 8>; /* PTB0...PTB7 */
};

gpio1: gpio@4004a000 {
@@ -394,6 +395,10 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
+ fsl,gpio-wakeup = <&wakeup 1 8 2>, /* PTB11, PTB12 (NMI)*/
+ <&wakeup 4 10 1>, /* PTB14 */
+ <&wakeup 6 11 1>, /* PTB16 */
+ <&wakeup 9 12 2>; /* PTB19, PTB20 */
};

gpio2: gpio@4004b000 {
@@ -416,6 +421,9 @@
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
+ fsl,gpio-wakeup = <&wakeup 1 14 1>, /* PTB27 */
+ <&wakeup 7 15 1>, /* PTC30 */
+ <&wakeup 29 16 1>; /* PTE20 */
};

gpio4: gpio@4004d000 {
--
2.7.2
\
 
 \ /
  Last update: 2016-03-10 04:01    [W:0.250 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site