lkml.org 
[lkml]   [2016]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/3] input: touchscreen: ad7879: add device tree support
On Tue, Feb 02, 2016 at 03:20:18PM -0800, Stefan Agner wrote:
> Add device tree support for the I2C and SPI variant of AD7879(-1).
> This allows to specify the touchscreen controller as a I2C client
> node or SPI slave device. Most of the options available in platform
> data are also available as device tree properties, the only exception
> being GPIO capabilities, which can not be activated through device
> tree currently.
>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> Changes since v2:
> - do not free driver data and irq on remove (since we are using devm now)
> Changes since v1:
> - Move device tree parsing to main driver file ad7879.c
> - Use common touchscreen_parse_properties for common properties
> - Use device_property_* API
> - Use struct ad7879 directly to store parsed values
> - Support SPI variant through device tree too (untested)
> - Add vendor prefix to vendor specific dt properties
>
> .../bindings/input/touchscreen/ad7879.txt | 53 ++++++++
> drivers/input/touchscreen/ad7879-i2c.c | 10 ++
> drivers/input/touchscreen/ad7879-spi.c | 10 ++
> drivers/input/touchscreen/ad7879.c | 145 +++++++++++++--------
> 4 files changed, 161 insertions(+), 57 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
> new file mode 100644
> index 0000000..e3f22d2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
> @@ -0,0 +1,53 @@
> +* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
> +
> +Required properties:
> +- compatible : for SPI slave, use "adi,ad7879"
> + for I2C slave, use "adi,ad7879-1"
> +- reg : SPI chipselect/I2C slave address
> + See spi-bus.txt for more SPI slave properties
> +- interrupt-parent : the phandle for the interrupt controller
> +- interrupts : touch controller interrupt
> +- touchscreen-max-pressure : maximum reported pressure
> +- adi,resistance-plate-x : total resistance of X-plate (for pressure
> + calculation)
> +Optional properties:
> +- touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
> +- adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us)
> + 13 : 2.560ms
> + 14 : 3.584ms
> + 15 : 4.096ms
> + This property has to be a '/bits/ 8' value
> +- adi,acquisition-time : 0: 2us
> + 1: 4us
> + 2: 8us
> + 3: 16us
> + This property has to be a '/bits/ 8' value
> +- adi,median-filter-size : 0: disabled
> + 1: 4 measurements
> + 2: 8 measurements
> + 3: 16 measurements
> + This property has to be a '/bits/ 8' value
> +- adi,averaging : 0: 2 middle values (1 if median disabled)
> + 1: 4 middle values
> + 2: 8 middle values
> + 3: 16 values
> + This property has to be a '/bits/ 8' value
> +- adi,conversion-interval: : 0 : convert one time only
> + 1-255: 515us + val * 35us (up to 9.440ms)
> + This property has to be a '/bits/ 8' value
> +
> +Example:
> +
> + ad7879@2c {
> + compatible = "adi,ad7879-1";
> + reg = <0x2c>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
> + touchscreen-max-pressure = <4096>;
> + adi,resistance-plate-x = <120>;
> + adi,first-conversion-delay = /bits/ 8 <3>;
> + adi,acquisition-time = /bits/ 8 <1>;
> + adi,median-filter-size = /bits/ 8 <2>;
> + adi,averaging = /bits/ 8 <1>;
> + adi,conversion-interval = /bits/ 8 <255>;
> + };
> diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c
> index d66962c..58f72e0 100644
> --- a/drivers/input/touchscreen/ad7879-i2c.c
> +++ b/drivers/input/touchscreen/ad7879-i2c.c
> @@ -10,6 +10,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/types.h>
> +#include <linux/of.h>
> #include <linux/pm.h>
>
> #include "ad7879.h"
> @@ -91,10 +92,19 @@ static const struct i2c_device_id ad7879_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, ad7879_id);
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id ad7879_i2c_dt_ids[] = {
> + { .compatible = "adi,ad7879-1", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ad7879_i2c_dt_ids);
> +#endif
> +
> static struct i2c_driver ad7879_i2c_driver = {
> .driver = {
> .name = "ad7879",
> .pm = &ad7879_pm_ops,
> + .of_match_table = of_match_ptr(ad7879_i2c_dt_ids),
> },
> .probe = ad7879_i2c_probe,
> .remove = ad7879_i2c_remove,
> diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
> index 48033c2..d42b6b9 100644
> --- a/drivers/input/touchscreen/ad7879-spi.c
> +++ b/drivers/input/touchscreen/ad7879-spi.c
> @@ -10,6 +10,7 @@
> #include <linux/pm.h>
> #include <linux/spi/spi.h>
> #include <linux/module.h>
> +#include <linux/of.h>
>
> #include "ad7879.h"
>
> @@ -146,10 +147,19 @@ static int ad7879_spi_remove(struct spi_device *spi)
> return 0;
> }
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id ad7879_spi_dt_ids[] = {
> + { .compatible = "adi,ad7879", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ad7879_spi_dt_ids);
> +#endif
> +
> static struct spi_driver ad7879_spi_driver = {
> .driver = {
> .name = "ad7879",
> .pm = &ad7879_pm_ops,
> + .of_match_table = of_match_ptr(ad7879_spi_dt_ids),
> },
> .probe = ad7879_spi_probe,
> .remove = ad7879_spi_remove,
> diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
> index abd0220..093cb04 100644
> --- a/drivers/input/touchscreen/ad7879.c
> +++ b/drivers/input/touchscreen/ad7879.c
> @@ -31,6 +31,7 @@
> #include <linux/i2c.h>
> #include <linux/gpio.h>
>
> +#include <linux/input/touchscreen.h>
> #include <linux/platform_data/ad7879.h>
> #include <linux/module.h>
> #include "ad7879.h"
> @@ -126,7 +127,6 @@ struct ad7879 {
> u8 pen_down_acc_interval;
> u8 median;
> u16 x_plate_ohms;
> - u16 pressure_max;
> u16 cmd_crtl1;
> u16 cmd_crtl2;
> u16 cmd_crtl3;
> @@ -186,7 +186,7 @@ static int ad7879_report(struct ad7879 *ts)
> * Sample found inconsistent, pressure is beyond
> * the maximum. Don't report it to user space.
> */
> - if (Rt > ts->pressure_max)
> + if (Rt > input_abs_get_max(input_dev, ABS_PRESSURE))
> return -EINVAL;
>
> /*
> @@ -469,7 +469,7 @@ static void ad7879_gpio_remove(struct ad7879 *ts)
> {
> const struct ad7879_platform_data *pdata = dev_get_platdata(ts->dev);
>
> - if (pdata->gpio_export)
> + if (pdata && pdata->gpio_export)
> gpiochip_remove(&ts->gc);
>
> }
> @@ -485,6 +485,29 @@ static inline void ad7879_gpio_remove(struct ad7879 *ts)
> }
> #endif
>
> +static int ad7879_parse_dt(struct device *dev, struct ad7879 *ts)
> +{
> + int err;
> + u32 tmp;
> +
> + err = device_property_read_u32(dev, "adi,resistance-plate-x", &tmp);
> + if (err) {
> + dev_err(dev, "failed to get resistance-plate-x property\n");
> + return err;
> + }
> + ts->x_plate_ohms = (u16)tmp;
> +
> + device_property_read_u8(dev, "adi,first-conversion-delay", &ts->first_conversion_delay);
> + device_property_read_u8(dev, "adi,acquisition-time", &ts->acquisition_time);
> + device_property_read_u8(dev, "adi,median-filter-size", &ts->median);
> + device_property_read_u8(dev, "adi,averaging", &ts->averaging);
> + device_property_read_u8(dev, "adi,conversion-interval", &ts->pen_down_acc_interval);

I wrapped this block so it does not exceed 80 columns.

> +
> + ts->swap_xy = device_property_read_bool(dev, "touchscreen-swapped-x-y");
> +
> + return 0;
> +}
> +
> struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
> const struct ad7879_bus_ops *bops)
> {
> @@ -495,22 +518,37 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
> u16 revid;
>
> if (!irq) {
> - dev_err(dev, "no IRQ?\n");
> - err = -EINVAL;
> - goto err_out;
> + dev_err(dev, "No IRQ specified\n");
> + return ERR_PTR(-EINVAL);
> }
>
> - if (!pdata) {
> - dev_err(dev, "no platform data?\n");
> - err = -EINVAL;
> - goto err_out;
> + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> + if (!ts)
> + return ERR_PTR(-ENOMEM);
> +
> + if (pdata) {
> + /* Platform data use swapped axis (backward compatibility) */
> + ts->swap_xy = !pdata->swap_xy;
> +
> + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
> +
> + ts->first_conversion_delay = pdata->first_conversion_delay;
> + ts->acquisition_time = pdata->acquisition_time;
> + ts->averaging = pdata->averaging;
> + ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
> + ts->median = pdata->median;
> +
> + } else if (dev->of_node) {
> + ad7879_parse_dt(dev, ts);
> + } else {
> + dev_err(dev, "No platform data\n");
> + return ERR_PTR(-EINVAL);
> }
>
> - ts = kzalloc(sizeof(*ts), GFP_KERNEL);
> - input_dev = input_allocate_device();
> - if (!ts || !input_dev) {
> - err = -ENOMEM;
> - goto err_free_mem;
> + input_dev = devm_input_allocate_device(dev);
> + if (!input_dev) {
> + dev_err(dev, "Failed to allocate input device\n");
> + return ERR_PTR(-ENOMEM);
> }
>
> ts->bops = bops;
> @@ -518,20 +556,7 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
> ts->input = input_dev;
> ts->irq = irq;
>
> - /* Use swapped axis by default (backward compatibility) */
> - ts->swap_xy = !pdata->swap_xy;
> -
> setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);
> -
> - ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
> - ts->pressure_max = pdata->pressure_max ? : ~0;
> -
> - ts->first_conversion_delay = pdata->first_conversion_delay;
> - ts->acquisition_time = pdata->acquisition_time;
> - ts->averaging = pdata->averaging;
> - ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
> - ts->median = pdata->median;
> -
> snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
>
> input_dev->name = "AD7879 Touchscreen";
> @@ -552,21 +577,33 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
> __set_bit(EV_KEY, input_dev->evbit);
> __set_bit(BTN_TOUCH, input_dev->keybit);
>
> - input_set_abs_params(input_dev, ABS_X,
> - pdata->x_min ? : 0,
> - pdata->x_max ? : MAX_12BIT,
> - 0, 0);
> - input_set_abs_params(input_dev, ABS_Y,
> - pdata->y_min ? : 0,
> - pdata->y_max ? : MAX_12BIT,
> - 0, 0);
> - input_set_abs_params(input_dev, ABS_PRESSURE,
> - pdata->pressure_min, pdata->pressure_max, 0, 0);
> + if (pdata) {
> + input_set_abs_params(input_dev, ABS_X,
> + pdata->x_min ? : 0,
> + pdata->x_max ? : MAX_12BIT,
> + 0, 0);
> + input_set_abs_params(input_dev, ABS_Y,
> + pdata->y_min ? : 0,
> + pdata->y_max ? : MAX_12BIT,
> + 0, 0);
> + input_set_abs_params(input_dev, ABS_PRESSURE,
> + pdata->pressure_min,
> + pdata->pressure_max ? : ~0,
> + 0, 0);
> + } else {
> + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
> + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
> + touchscreen_parse_properties(input_dev, false);
> + if (!input_abs_get_max(input_dev, ABS_PRESSURE)) {
> + dev_err(dev, "Touchscreen pressure is not specified\n");
> + return ERR_PTR(-EINVAL);
> + }
> + }
>
> err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET);
> if (err < 0) {
> dev_err(dev, "Failed to write %s\n", input_dev->name);
> - goto err_free_mem;
> + return ERR_PTR(err);
> }
>
> revid = ad7879_read(ts, AD7879_REG_REVID);
> @@ -575,8 +612,7 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
> if (input_dev->id.product != devid) {
> dev_err(dev, "Failed to probe %s (%x vs %x)\n",
> input_dev->name, devid, revid);
> - err = -ENODEV;
> - goto err_free_mem;
> + return ERR_PTR(-ENODEV);
> }
>
> ts->cmd_crtl3 = AD7879_YPLUS_BIT |
> @@ -596,23 +632,25 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
> AD7879_ACQ(ts->acquisition_time) |
> AD7879_TMR(ts->pen_down_acc_interval);
>
> - err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
> - IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> - dev_name(dev), ts);
> + err = devm_request_threaded_irq(dev, ts->irq, NULL, ad7879_irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + dev_name(dev), ts);
> if (err) {
> - dev_err(dev, "irq %d busy?\n", ts->irq);
> - goto err_free_mem;
> + dev_err(dev, "Failed to request IRQ: %d\n", err);
> + return ERR_PTR(err);
> }
>
> __ad7879_disable(ts);
>
> err = sysfs_create_group(&dev->kobj, &ad7879_attr_group);
> if (err)
> - goto err_free_irq;
> + goto err_out;
>
> - err = ad7879_gpio_add(ts, pdata);
> - if (err)
> - goto err_remove_attr;
> + if (pdata) {
> + err = ad7879_gpio_add(ts, pdata);
> + if (err)
> + goto err_remove_attr;
> + }
>
> err = input_register_device(input_dev);
> if (err)
> @@ -624,11 +662,6 @@ err_remove_gpio:
> ad7879_gpio_remove(ts);
> err_remove_attr:
> sysfs_remove_group(&dev->kobj, &ad7879_attr_group);
> -err_free_irq:
> - free_irq(ts->irq, ts);
> -err_free_mem:
> - input_free_device(input_dev);
> - kfree(ts);
> err_out:
> return ERR_PTR(err);
> }
> @@ -638,9 +671,7 @@ void ad7879_remove(struct ad7879 *ts)
> {
> ad7879_gpio_remove(ts);
> sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group);
> - free_irq(ts->irq, ts);
> input_unregister_device(ts->input);

You do not need to call input_unregister_device() for devm-managed input
devices, I dropped it.

> - kfree(ts);
> }
> EXPORT_SYMBOL(ad7879_remove);
>
> --
> 2.7.0
>

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2016-03-08 20:21    [W:0.085 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site