lkml.org 
[lkml]   [2016]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/2] mmc: dw_mmc: controller reset support
From
Date
+ Heiko
On 2016/3/30 15:24, Guodong Xu wrote:
> mmc controller registers may in abnormal state if mmc is used in
> bootloader, eg. to load kernel from eMMC. Some controllers cann't
> clear their registers when clk is set. They use dedicated reset
> logics to do this.
>
> In this patch, a 'resets' property is added into dw_mmc dts
> node. When driver does parse_dt and probe, it calls reset API to
> deassert the 'reset' of dw_mmc host controller. When probe error or
> remove, it calls reset API to assert it.
>
> Chip vendor's actual reset logics is implemented in reset driver, not
> in dw_mmc code.
>
> Please also refer to Documentation/devicetree/bindings/reset/reset.txt
>
> Guodong Xu (2):
> Documentation: synopsys-dw-mshc: add binding for resets
> mmc: dw_mmc: add resets support to dw_mmc
>
> .../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 4 ++++
> drivers/mmc/host/dw_mmc.c | 20 +++++++++++++++++++-
> include/linux/mmc/dw_mmc.h | 6 ++++--
> 3 files changed, 27 insertions(+), 3 deletions(-)
>


--
Best Regards
Shawn Lin

\
 
 \ /
  Last update: 2016-03-30 14:21    [W:0.159 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site