lkml.org 
[lkml]   [2016]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] i.MX6 PCIe: Fix imx6_pcie_deassert_core_reset() polarity
Date
On Wednesday 30 March 2016 10:00:33 Roberto Fichera wrote:
> >
> > Check your XIO2001 routing and insure the following for proper IRQ mapping:
> > Slot12: IDSEL A28: socket INTA = XIO2001 INTA
> > Slot13: IDSEL A29: socket INTA = XIO2001 INTB
> > Slot14: IDSEL A30: socket INTA = XIO2001 INTC
> > Slot15: IDSEL A31: socket INTA = XIO2001 INTD
>
> After crosschecking with our hardware designer the PCB IRQ mapping is the following:
>
> J2 : IDSEL A16: => Device 0 : socket INTA = XIO2001 INTA
> J3 : IDSEL A18: => Device 2 : socket INTA = XIO2001 INTA* **(This should be INTC)*
> J11: IDSEL A20: => Device 4 : socket INTA = XIO2001 INTA
>
> The interrupt routing for J3 is wrong. The XIO2001 driver may expect Device 2 to interrupt on INTC - but it will
> interrupt on INTA.

What does your interrupt-map property look like then? Note that you
have to override both map and map-mask in this case.

Arnd

\
 
 \ /
  Last update: 2016-03-30 13:01    [W:0.143 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site