lkml.org 
[lkml]   [2016]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3] net: jme: fix suspend/resume on JMC260
From
On Thu, Mar 3, 2016 at 2:55 AM, Diego Viola <diego.viola@gmail.com> wrote:
> On Thu, Mar 3, 2016 at 12:19 AM, Diego Viola <diego.viola@gmail.com> wrote:
>> On Wed, Mar 2, 2016 at 2:14 AM, Guo-Fu Tseng <cooldavid@cooldavid.org> wrote:
>>> On Wed, 24 Feb 2016 23:58:56 -0500 (EST), David Miller wrote
>>>> From: Diego Viola <diego.viola@gmail.com>
>>>> Date: Tue, 23 Feb 2016 12:04:04 -0300
>>>>
>>>> > The JMC260 network card fails to suspend/resume because the call to
>>>> > jme_start_irq() was too early, moving the call to jme_start_irq() after
>>>> > the call to jme_reset_link() makes it work.
>>>> >
>>>> > Prior this change suspend/resume would fail unless /sys/power/pm_async=0
>>>> > was explicitly specified.
>>>> >
>>>> > Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351
>>>> >
>>>> > Signed-off-by: Diego Viola <diego.viola@gmail.com>
>>>>
>>>> Applied and queued up for -stable, thanks.
>>>
>>> Just reviewed it, it should have no side effect.
>>>
>>> Thanks David, Diego.
>>>
>>> Guo-Fu Tseng
>>>
>>
>> Hi all,
>>
>> I'm having another issue with jme and I'm not sure if it's related to
>> the same issue with suspend/resume, but the problem now is WoL.
>>
>> Let me try to describe the problem a bit:
>>
>> I put my machine to sleep in S3 and I send WoL packets from a laptop,
>> and the machine doesn't wake up at all, I tried inspecting packets
>> with tcpdump and nothing shows up in the tcpdump output.
>>
>> When the machine is in working state, and I send WoL packets and I
>> initiate a S3, it refuses to go in sleep mode.
>>
>> I tried the same in Windows (waking up from S3 via WoL) and it works there.
>>
>> Does anyone have any ideas what the problem can be? I talked with Guo
>> and he suspects the problem is motherboard failure, I also think the
>> issue can be a BIOS bug since I hear so many horror stories about AMI
>> BIOS issues with Linux.
>>
>> But it's still a mystery to me given all these conditions I mentioned.
>>
>> Diego
>
> The reason I believe that both problems might be connected
> (suspend/resume & WoL) is that when I disable WoL with ethtool, e.g.
>
> sudo ethtool -s eth0 wol d
>
> The resume from suspend hang disappears, and there is no need for the
> patch that moves the jme_start_irq() function call anymore, this also
> regardless of pm_async being 1 or 0.
>
> Can someone experienced with power management help here please?
>
> Diego

Actually, I just tried it now and I CAN read see the packets coming in
in the tcpdump output.

The machine just doesn't wake up from S3 after I send the packets.

Any ideas?

Diego

\
 
 \ /
  Last update: 2016-03-03 23:01    [W:0.069 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site