lkml.org 
[lkml]   [2016]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [drm:radeon_dp_link_train] *ERROR* clock recovery failed -bisected
Date
> -----Original Message-----
> From: Ken Moffat [mailto:zarniwhoop@ntlworld.com]
> Sent: Thursday, March 03, 2016 6:47 PM
> To: Deucher, Alexander; StDenis, Tom
> Cc: dri-devel@lists.freedesktop.org; linux-kernel@vger.kernel.org
> Subject: [drm:radeon_dp_link_train] *ERROR* clock recovery failed -
> bisected
>
> On Thu, Mar 03, 2016 at 02:38:11AM +0000, Ken Moffat wrote:
> > One of my machines is an A10 Kaveri desktop, with a good old VGA
> > connection to the monitor. I've only just started trying to boot
> > any 4.5 kernel on it, but with 4.5.0-rc6 and now linus's tree from a
> > few hours ago (4.5.0-rc6-00018-gf983cd3) I get a blank screen, with
> > no video signal, as soon as it tries to switch to a framebuffer.
> >
> > Comparing the logs, the first bad attempt had a couple of new error
> > messages, everything else in the logs looked normal -
> >
> > Mar 1 19:31:10 deluxe kernel: [ 2.543163] fbcon: radeondrmfb (fb0) is
> primary device
> > Mar 1 19:31:10 deluxe kernel: [ 2.654179] [drm:radeon_dp_link_train]
> *ERROR* clock recovery reached max voltage
> > Mar 1 19:31:10 deluxe kernel: [ 2.654181] [drm:radeon_dp_link_train]
> *ERROR* clock recovery failed
> > Mar 1 19:31:10 deluxe kernel: [ 2.677142] Console: switching to colour
> frame buffer device 200x56
> > Mar 1 19:31:10 deluxe kernel: [ 2.680435] radeon 0000:00:01.0: fb0:
> radeondrmfb frame buffer device
> >
> Bisection pointed to
>
> 092c96a8ab9d1bd60ada2ed385cc364ce084180e is the first bad commit
> commit 092c96a8ab9d1bd60ada2ed385cc364ce084180e
> Author: Alex Deucher <alexander.deucher@amd.com>
> Date: Thu Dec 17 10:23:34 2015 -0500
>
> drm/radeon: fix dp link rate selection (v2)
>
> Need to properly handle the max link rate in the dpcd.
> This prevents some cases where 5.4 Ghz is selected when
> it shouldn't be.
>
> v2: simplify logic, add array bounds check
>
> Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>
> I have now reverted that commit from that version of linus's tree and
> the machine everything is back to normal.
>

The attached radeon patch should fix it. I accidently dropped the special handling for NUTMEG DP to VGA bridge chips.

> This mobo does not have a DP connector.
>

The VGA port uses a DP to VGA bridge chip.

Alex

> lspci reports the graphics part is
>
> 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc.
> [AMD/ATI] Kaveri [Radeon R7 Graphics] (prog-if 00 [VGA controller])
> Subsystem: Gigabyte Technology Co., Ltd Kaveri [Radeon R7 Graphics]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PER
> R- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 26
> Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
> Region 2: Memory at d0000000 (64-bit, prefetchable) [size=8M]
> Region 4: I/O ports at f000 [size=256]
> Region 5: Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
> Expansion ROM at feb40000 [disabled] [size=128K]
> Capabilities: [48] Vendor Specific Information: Len=08 <?>
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
> ,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-,
> OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
> Disabled
> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000fee0f00c Data: 4172
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
> Len=010 <?>
> Capabilities: [270 v1] #19
> Capabilities: [2b0 v1] Address Translation Service (ATS)
> ATSCap: Invalidate Queue Depth: 00
> ATSCtl: Enable-, Smallest Translation Unit: 00
> Capabilities: [2c0 v1] Page Request Interface (PRI)
> PRICtl: Enable- Reset-
> PRISta: RF- UPRGI- Stopped+
> Page Request Capacity: 00000020, Page Request Allocation: 00000000
> Capabilities: [2d0 v1] Process Address Space ID (PASID)
> PASIDCap: Exec- Priv-, Max PASID Width: 10
> PASIDCtl: Enable- Exec- Priv-
> Kernel driver in use: radeon
>
> I've attached my config. Please let me know if there is anything I
> can do to help fix this.
>
> ĸen
> --
> This email was written using 100% recycled letters.
[unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2016-03-04 04:01    [W:0.594 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site