lkml.org 
[lkml]   [2016]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 7/8] ARM: dts: vf610: add display nodes
Date
Add the dcu and tcon nodes to enable the Display Controller Unit
and Timing Controller in Vybrid's SoC level device-tree file.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/vfxxx.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index a9ceb5b..78e24c6 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -234,6 +234,14 @@
<20000000>;
};

+ tcon0: timing-controller@4003d000 {
+ compatible = "fsl,vf610-tcon";
+ reg = <0x4003d000 0x1000>;
+ clocks = <&clks VF610_CLK_TCON0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
wdoga5: wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
@@ -339,6 +347,17 @@
status = "disabled";
};

+ dcu0: dcu@40058000 {
+ compatible = "fsl,vf610-dcu";
+ reg = <0x40058000 0x1200>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DCU0>,
+ <&clks VF610_CLK_DCU0_DIV>;
+ clock-names = "dcu", "pix";
+ fsl,tcon = <&tcon0>;
+ status = "disabled";
+ };
+
i2c0: i2c@40066000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
\
 
 \ /
  Last update: 2016-03-29 04:21    [W:0.086 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site