lkml.org 
[lkml]   [2016]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] regulator: twl: Enable regulators over the powerbus as well
On Fri, Mar 25, 2016 at 04:02:59PM +0100, Sebastian Reichel wrote:
> On Fri, Mar 25, 2016 at 11:17:57AM +0000, Mark Brown wrote:
> > On Wed, Mar 23, 2016 at 09:22:36PM +0200, Ivaylo Dimitrov wrote:

> > > Assigning a device group to a regulator does not change its state. To
> > > change the state of a regulator a message over the powerbus is required.
> > > Also, the check for the current state of a regulator should not count on
> > > a device group being assigned, but on the current resource state.

> > How did this driver ever work then? It sounds like there must be
> > something else going on here.

> From my understanding of the twl4030 TRM assigning a device group
> means "<device group> wants this regulator enabled". It does not
> change the regulator mode (sleep vs normal or in regulator-framework
> terms: REGULATOR_STATUS_NORMAL vs REGULATOR_STATUS_STANDBY).

> It usually works, since the default state is normal. If the system
> is rebooted from a non-mainline kernel, which left the regulator in
> sleep/standby, nothing in the kernel switches it to normal.

I really can't tell how anyone could get from the changelog to what
you're saying about modes. The explanation needs to be *much* clearer.

Part of the confusion is that if you're trying to do something to do
with the mode support that really needs to use the mode APIs, enabling
or disabling the regulator should not silently change the mode.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-03-25 17:01    [W:0.342 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site