lkml.org 
[lkml]   [2016]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 2/2] drivers: net: ethernet: dlink: dl2k: fix indent
From
Date
If dl2k is modified at all, maybe convert the
printks to netdev_<level> too so that the logging
output is more like other networking drivers.

Something like:
---
 drivers/net/ethernet/dlink/dl2k.c | 181 +++++++++++++++++++++-----------------
 1 file changed, 100 insertions(+), 81 deletions(-)

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index f92b6d9..0f0326b 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -10,9 +10,9 @@
     (at your option) any later version.
 */
 
-#define DRV_NAME "DL2000/TC902x-based linux driver"
 #define DRV_VERSION "v1.19"
 #define DRV_RELDATE "2007/08/12"
+
 #include "dl2k.h"
 #include <linux/dma-mapping.h>
 
@@ -23,8 +23,6 @@
 #define dr16(reg) ioread16(ioaddr + (reg))
 #define dr8(reg) ioread8(ioaddr + (reg))
 
-static char version[] =
-      KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";
 #define MAX_UNITS 8
 static int mtu[MAX_UNITS];
 static int vlan[MAX_UNITS];
@@ -118,12 +116,11 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
  int chip_idx = ent->driver_data;
  int err, irq;
  void __iomem *ioaddr;
- static int version_printed;
  void *ring_space;
  dma_addr_t ring_dma;
 
- if (!version_printed++)
- printk ("%s", version);
+ pr_info_once("DL2000/TC902x-based linux driver %s %s\n",
+      DRV_VERSION, DRV_RELDATE);
 
  err = pci_enable_device (pdev);
  if (err)
@@ -274,18 +271,20 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 
  card_idx++;
 
- printk (KERN_INFO "%s: %s, %pM, IRQ %d\n",
- dev->name, np->name, dev->dev_addr, irq);
+ netdev_info(dev, "%s, %pM, IRQ %d\n",
+     np->name, dev->dev_addr, irq);
  if (tx_coalesce > 1)
- printk(KERN_INFO "tx_coalesce:\t%d packets\n",
- tx_coalesce);
- if (np->coalesce)
- printk(KERN_INFO
-        "rx_coalesce:\t%d packets\n"
-        "rx_timeout: \t%d ns\n",
- np->rx_coalesce, np->rx_timeout*640);
+ netdev_info(dev, "tx_coalesce:\t%d packets\n",
+     tx_coalesce);
+ if (np->coalesce) {
+ netdev_info(dev, "rx_coalesce:\t%d packets\n",
+     np->rx_coalesce);
+ netdev_info(dev, "rx_timeout: \t%d ns\n",
+     np->rx_timeout * 640);
+ }
  if (np->vlan)
- printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
+ netdev_info(dev, "vlan(id):\t%d\n", np->vlan);
+
  return 0;
 
 err_out_unmap_rx:
@@ -322,7 +321,7 @@ find_miiphy (struct net_device *dev)
  }
  }
  if (!phy_found) {
- printk (KERN_ERR "%s: No MII PHY found!\n", dev->name);
+ netdev_err(dev, "No MII PHY found!\n");
  return -ENODEV;
  }
  return 0;
@@ -348,8 +347,7 @@ parse_eeprom (struct net_device *dev)
  /* Check CRC */
  crc = ~ether_crc_le (256 - 4, sromdata);
  if (psrom->crc != cpu_to_le32(crc)) {
- printk (KERN_ERR "%s: EEPROM data CRC error.\n",
- dev->name);
+ netdev_err(dev, "EEPROM data CRC error\n");
  return -1;
  }
  }
@@ -374,7 +372,7 @@ parse_eeprom (struct net_device *dev)
  cid = psib[i++];
  next = psib[i++];
  if ((cid == 0 && next == 0) || (cid == 0xff && next == 0xff)) {
- printk (KERN_ERR "Cell data error\n");
+ netdev_err(dev, "Cell data error\n");
  return -1;
  }
  switch (cid) {
@@ -664,7 +662,7 @@ rio_timer (unsigned long data)
  spin_lock_irqsave(&np->rx_lock, flags);
  /* Recover rx ring exhausted error */
  if (np->cur_rx - np->old_rx >= RX_RING_SIZE) {
- printk(KERN_INFO "Try to recover rx ring exhausted...\n");
+ netdev_info(dev, "Trying to recover, rx ring exhausted...\n");
  /* Re-allocate skbuffs to fill the descriptor ring */
  for (; np->cur_rx - np->old_rx > 0; np->old_rx++) {
  struct sk_buff *skb;
@@ -675,9 +673,8 @@ rio_timer (unsigned long data)
  np->rx_buf_sz);
  if (skb == NULL) {
  np->rx_ring[entry].fraginfo = 0;
- printk (KERN_INFO
- "%s: Still unable to re-allocate Rx skbuff.#%d\n",
- dev->name, entry);
+ netdev_info(dev, "Still unable to re-allocate Rx skbuff.#%d\n",
+     entry);
  break;
  }
  np->rx_skbuff[entry] = skb;
@@ -702,8 +699,8 @@ rio_tx_timeout (struct net_device *dev)
  struct netdev_private *np = netdev_priv(dev);
  void __iomem *ioaddr = np->ioaddr;
 
- printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n",
- dev->name, dr32(TxStatus));
+ netdev_info(dev, "Tx timed out (%04x), is buffer full?\n",
+     dr32(TxStatus));
  rio_free_tx(dev, 0);
  dev->if_port = 0;
  dev->trans_start = jiffies; /* prevent tx timeout */
@@ -874,8 +871,8 @@ tx_error (struct net_device *dev, int tx_status)
  int i;
 
  frame_id = (tx_status & 0xffff0000);
- printk (KERN_ERR "%s: Transmit error, TxStatus %4.4x, FrameId %d.\n",
- dev->name, tx_status, frame_id);
+ netdev_err(dev, "Transmit error, TxStatus %04x, FrameId %d\n",
+    tx_status, frame_id);
  np->stats.tx_errors++;
  /* Ttransmit Underrun */
  if (tx_status & 0x10) {
@@ -1007,10 +1004,8 @@ receive_packet (struct net_device *dev)
  skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz);
  if (skb == NULL) {
  np->rx_ring[entry].fraginfo = 0;
- printk (KERN_INFO
- "%s: receive_packet: "
- "Unable to re-allocate Rx skbuff.#%d\n",
- dev->name, entry);
+ netdev_info(dev, "receive_packet: Unable to re-allocate Rx skbuff.#%d\n",
+     entry);
  break;
  }
  np->rx_skbuff[entry] = skb;
@@ -1039,7 +1034,7 @@ rio_error (struct net_device *dev, int int_status)
  /* Link change event */
  if (int_status & LinkEvent) {
  if (mii_wait_link (dev, 10) == 0) {
- printk (KERN_INFO "%s: Link up\n", dev->name);
+ netdev_info(dev, "Link up\n");
  if (np->phy_media)
  mii_get_media_pcs (dev);
  else
@@ -1059,7 +1054,7 @@ rio_error (struct net_device *dev, int int_status)
  np->link_status = 1;
  netif_carrier_on(dev);
  } else {
- printk (KERN_INFO "%s: Link off\n", dev->name);
+ netdev_info(dev, "Link off\n");
  np->link_status = 0;
  netif_carrier_off(dev);
  }
@@ -1073,8 +1068,7 @@ rio_error (struct net_device *dev, int int_status)
  /* PCI Error, a catastronphic error related to the bus interface
     occurs, set GlobalReset and HostReset to reset. */
  if (int_status & HostError) {
- printk (KERN_ERR "%s: HostError! IntStatus %4.4x.\n",
- dev->name, int_status);
+ netdev_err(dev, "HostError! IntStatus %04x\n", int_status);
  dw16(ASICCtrl + 2, GlobalReset | HostReset);
  mdelay (500);
  rio_set_led_mode(dev);
@@ -1325,7 +1319,7 @@ static int rio_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
  if (np->speed == 1000) {
  ethtool_cmd_speed_set(cmd, SPEED_100);
  cmd->duplex = DUPLEX_FULL;
- printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n");
+ netdev_warn(dev, "Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex\n");
  }
  switch (ethtool_cmd_speed(cmd)) {
  case SPEED_10:
@@ -1515,6 +1509,9 @@ mii_get_media (struct net_device *dev)
  __u16 mssr;
  int phy_addr;
  struct netdev_private *np;
+ const char *how;
+ const char *speed;
+ const char *duplex;
 
  np = netdev_priv(dev);
  phy_addr = np->phy_addr;
@@ -1525,6 +1522,7 @@ mii_get_media (struct net_device *dev)
  /* Auto-Negotiation not completed */
  return -1;
  }
+ how = "Auto";
  negotiate = mii_read (dev, phy_addr, MII_ADVERTISE) &
  mii_read (dev, phy_addr, MII_LPA);
  mscr = mii_read (dev, phy_addr, MII_CTRL1000);
@@ -1532,27 +1530,36 @@ mii_get_media (struct net_device *dev)
  if (mscr & ADVERTISE_1000FULL && mssr & LPA_1000FULL) {
  np->speed = 1000;
  np->full_duplex = 1;
- printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
+ speed = "1000";
+ duplex = "Full";
  } else if (mscr & ADVERTISE_1000HALF && mssr & LPA_1000HALF) {
  np->speed = 1000;
  np->full_duplex = 0;
- printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");
+ speed = "1000";
+ duplex = "Half";
  } else if (negotiate & ADVERTISE_100FULL) {
  np->speed = 100;
  np->full_duplex = 1;
- printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");
+ speed = "100";
+ duplex = "Full";
  } else if (negotiate & ADVERTISE_100HALF) {
  np->speed = 100;
  np->full_duplex = 0;
- printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");
+ speed = "100";
+ duplex = "Half";
  } else if (negotiate & ADVERTISE_10FULL) {
  np->speed = 10;
  np->full_duplex = 1;
- printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");
+ speed = "10";
+ duplex = "Full";
  } else if (negotiate & ADVERTISE_10HALF) {
  np->speed = 10;
  np->full_duplex = 0;
- printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");
+ speed = "10";
+ duplex = "Half";
+ } else {
+ speed = "unknown";
+ duplex = "unknown";
  }
  if (negotiate & ADVERTISE_PAUSE_CAP) {
  np->tx_flow &= 1;
@@ -1564,30 +1571,33 @@ mii_get_media (struct net_device *dev)
  /* else tx_flow, rx_flow = user select  */
  } else {
  __u16 bmcr = mii_read (dev, phy_addr, MII_BMCR);
+
+ how = "Operating at";
  switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) {
  case BMCR_SPEED1000:
- printk (KERN_INFO "Operating at 1000 Mbps, ");
+ speed = "1000";
  break;
  case BMCR_SPEED100:
- printk (KERN_INFO "Operating at 100 Mbps, ");
+ speed = "100";
  break;
  case 0:
- printk (KERN_INFO "Operating at 10 Mbps, ");
- }
- if (bmcr & BMCR_FULLDPLX) {
- printk (KERN_CONT "Full duplex\n");
- } else {
- printk (KERN_CONT "Half duplex\n");
+ speed = "10";
+ break;
+ default:
+ speed = "unknown";
+ break;
  }
+ if (bmcr & BMCR_FULLDPLX)
+ duplex = "Full";
+ else
+ duplex = "Half";
+
  }
- if (np->tx_flow)
- printk(KERN_INFO "Enable Tx Flow Control\n");
- else
- printk(KERN_INFO "Disable Tx Flow Control\n");
- if (np->rx_flow)
- printk(KERN_INFO "Enable Rx Flow Control\n");
- else
- printk(KERN_INFO "Disable Rx Flow Control\n");
+
+ netdev_info(dev, "%s %s Mbps, %s duplex, Tx Flow Control: %s Rx Flow Control: %s\n",
+     how, speed, duplex,
+     np->tx_flow ? "Enabled" : "Disabled",
+     np->rx_flow ? "Enabled" : "Disabled");
 
  return 0;
 }
@@ -1636,6 +1646,10 @@ mii_set_media (struct net_device *dev)
  mii_write (dev, phy_addr, MII_BMCR, bmcr);
  mdelay(1);
  } else {
+ const char *how = "Manual";
+ const char *speed = "unknown";
+ const char *duplex = "unknown";
+
  /* Force speed setting */
  /* 1) Disable Auto crossover */
  pscr = mii_read (dev, phy_addr, MII_PHY_SCR);
@@ -1659,16 +1673,18 @@ mii_set_media (struct net_device *dev)
  bmcr = BMCR_PDOWN;
  if (np->speed == 100) {
  bmcr |= BMCR_SPEED100;
- printk (KERN_INFO "Manual 100 Mbps, ");
+ speed = "100";
  } else if (np->speed == 10) {
- printk (KERN_INFO "Manual 10 Mbps, ");
+ speed = "10";
  }
  if (np->full_duplex) {
  bmcr |= BMCR_FULLDPLX;
- printk (KERN_CONT "Full duplex\n");
+ duplex = "Full";
  } else {
- printk (KERN_CONT "Half duplex\n");
+ duplex = "Half";
  }
+ netdev_info(dev, "%s %s Mbps, %s duplex\n",
+     how, speed, duplex);
 #if 0
  /* Set 1000BaseT Master/Slave setting */
  mscr = mii_read (dev, phy_addr, MII_CTRL1000);
@@ -1688,6 +1704,9 @@ mii_get_media_pcs (struct net_device *dev)
  __u16 bmsr;
  int phy_addr;
  struct netdev_private *np;
+ const char *how;
+ const char *speed;
+ const char *duplex;
 
  np = netdev_priv(dev);
  phy_addr = np->phy_addr;
@@ -1698,15 +1717,17 @@ mii_get_media_pcs (struct net_device *dev)
  /* Auto-Negotiation not completed */
  return -1;
  }
+ how = "Auto";
  negotiate = mii_read (dev, phy_addr, PCS_ANAR) &
  mii_read (dev, phy_addr, PCS_ANLPAR);
  np->speed = 1000;
+ speed = "1000";
  if (negotiate & PCS_ANAR_FULL_DUPLEX) {
- printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
  np->full_duplex = 1;
+ duplex = "Full";
  } else {
- printk (KERN_INFO "Auto 1000 Mbps, half duplex\n");
  np->full_duplex = 0;
+ duplex = "Half";
  }
  if (negotiate & PCS_ANAR_PAUSE) {
  np->tx_flow &= 1;
@@ -1718,21 +1739,19 @@ mii_get_media_pcs (struct net_device *dev)
  /* else tx_flow, rx_flow = user select  */
  } else {
  __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
- printk (KERN_INFO "Operating at 1000 Mbps, ");
- if (bmcr & BMCR_FULLDPLX) {
- printk (KERN_CONT "Full duplex\n");
- } else {
- printk (KERN_CONT "Half duplex\n");
- }
+
+ how = "Operating at";
+ speed = "1000";
+ if (bmcr & BMCR_FULLDPLX)
+ duplex = "Full";
+ else
+ duplex = "Half";
  }
- if (np->tx_flow)
- printk(KERN_INFO "Enable Tx Flow Control\n");
- else
- printk(KERN_INFO "Disable Tx Flow Control\n");
- if (np->rx_flow)
- printk(KERN_INFO "Enable Rx Flow Control\n");
- else
- printk(KERN_INFO "Disable Rx Flow Control\n");
+
+ netdev_info(dev, "%s %s Mbps, %s duplex, Tx Flow Control: %s Rx Flow Control: %s\n",
+     how, speed, duplex,
+     np->tx_flow ? "Enabled" : "Disabled",
+     np->rx_flow ? "Enabled" : "Disabled");
 
  return 0;
 }
@@ -1775,10 +1794,10 @@ mii_set_media_pcs (struct net_device *dev)
  mdelay(10);
  if (np->full_duplex) {
  bmcr = BMCR_FULLDPLX;
- printk (KERN_INFO "Manual full duplex\n");
+ netdev_info(dev, "Manual full duplex\n");
  } else {
  bmcr = 0;
- printk (KERN_INFO "Manual half duplex\n");
+ netdev_info(dev, "Manual half duplex\n");
  }
  mii_write (dev, phy_addr, MII_BMCR, bmcr);
  mdelay(10);

\
 
 \ /
  Last update: 2016-03-23 19:01    [W:0.069 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site