lkml.org 
[lkml]   [2016]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/7] remoteproc: Add driver for STMicroelectronics platforms
On Wed, 27 Jan 2016, Bjorn Andersson wrote:

> On Tue, Jan 26, 2016 at 11:31 PM, Lee Jones <lee.jones@linaro.org> wrote:
> >
> > Apologies for ping (I hate doing that), but I haven't heard anything
> > from you. Do you want me to re-submit this set, or are you willing to
> > take this and apply the relevant Acks?
> >
>
> I had a chat with Ohad and offered my assistance with his work. So I
> will pick up the role as co-maintainer of his subsystems.
>
> I will pick up patch 1-4 of your v5 as soon as I've sorted out the
> practicalities around this, no need to resubmit them.
>
> Sorry for the delay!

Any news on this? We're nearing the merge window.

> > > ST's platforms often have multiple co-processors (usually ST40s or ST231s)
> > > on-board. This provides the Linux-side infrastructure to flash and boot
> > > them successfully.
> > >
> > > This set has been tested on an STiH410-B2120.
> > >
> > > v4 => v5:
> > > - Check for invalid 'count' (command read length) in write fn()s
> > >
> > > v3 => v4:
> > > Suggested-by: Suman Anna <s-anna@ti.com>
> > > - Move to using 'reserved-memory' API
> > > - New 'reserved-memory' nodes
> > > - Remove memory locations from RemoteProc's DT node's reg properties
> > > - Remove C code obtaining/allocating DMA memory
> > > - Re-order .start() and .stop() ops
> > > - Add protection around Reset API in error path
> > > - Explicitly set .has_iommu to false
> > >
> > > v2 => v3:
> > > - Generify syscon property (st,syscfg-boot => st,syscfg)
> > > - Rename IP in DT bindings doc (Remote Processor => Co-Processor)
> > > - Remove superfluous 'clock-names' property
> > > - Remove superfluous 'reg-names' property
> > > - Populate MAINTAINERS
> > > - Clean-up DTS formatting
> > > - Use strings in debugfs to control procs ('1|0' => 'start|stop')
> > > - Align copyright statement with MODULE() macros
> > > - Rename driver data structure ('st_rproc' => 'ddata')
> > > - Addition of a full error path in .start()
> > >
> > > v1 => v2:
> > > - Remove Linux implementation specific comment from binding document
> > > - Force debugfs '0' to shutdown co-processor - rather than !1
> > > - Supply more detailed commit message
> > > - Propagate errors back from .stop()
> > > - Review GPL wording
> > > - Supply original author's SoBs
> > >
> > > Lee Jones (7):
> > > remoteproc: debugfs: Check of invalid 'count' value
> > > remoteproc: dt: Provide bindings for ST's Remote Processor Controller
> > > driver
> > > remoteproc: debugfs: Add ability to boot remote processor using
> > > debugfs
> > > remoteproc: Supply controller driver for ST's Remote Processors
> > > MAINTAINERS: Add ST's Remote Processor Driver to ARM/STI ARCHITECTURE
> > > ARM: STiH407: Add nodes for RemoteProc
> > > ARM: STiH407: Move over to using the 'reserved-memory' API for
> > > obtaining DMA memory
> > >
> > > .../devicetree/bindings/remoteproc/st-rproc.txt | 41 +++
> > > MAINTAINERS | 1 +
> > > arch/arm/boot/dts/stih407-family.dtsi | 70 +++++
> > > drivers/remoteproc/Kconfig | 9 +
> > > drivers/remoteproc/Makefile | 1 +
> > > drivers/remoteproc/remoteproc_debugfs.c | 38 ++-
> > > drivers/remoteproc/st_remoteproc.c | 297 +++++++++++++++++++++
> > > 7 files changed, 455 insertions(+), 2 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> > > create mode 100644 drivers/remoteproc/st_remoteproc.c
> > >
> >

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-03-02 17:21    [W:0.054 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site