lkml.org 
[lkml]   [2016]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] power: reset: at91-shdwc: add new shutdown controller driver
On 16/03/2016 at 14:19:50 +0100, Nicolas Ferre wrote :
> Sama5d2 SoC has a completely new shutdown controller with new features and
> register layout. It thus makes sense to add a new driver for this new
> peripheral.
>
> This driver is Device Tree only and handles events from the wake-up pin and
> the RTC.
> As the register layout may change in the future, so some values are encoded
> in a configuration structure.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

> ---
>
> Changes in v5:
> - Instead of the "alternate shdwc" we choose a more specific
> "sama5d2-compatible shdwc" wording. Change file name, in Kconfig, and the
> MAINTAINERS file:
> at91-shdwc.c -> at91-sama5d2_shdwc.c
> "ATMEL AT91 Alternative Shutdown Controller" -> "ATMEL AT91 SAMA5D2-Compatible
> Shutdown Controller"
> - fix one indentation mismatch
>
> Changes in v4:
> - fix warning found by 0-day robot: large integer implicitly truncated to
> unsigned type [-Woverflow]
> - move to the property debounce-delay-us
> - move to atmel,wakeup-active-high boolean
> - add entry in MAINTAINERS file
>
> Changes in v3:
> - add the slow clock handle as the IP uses it
> - remove useless protection at the beginning of pm_power_off handler
> - allow to compile it as a module
> - add COMPILE_TEST directive in Kconfig
> - update description in file header
>
> Changes in v2:
> - add MODULE_DEVICE_TABLE as advised by Sebastian Reichel
> - review indentation and braces to correct errors pointed out by checkpatch
>
> MAINTAINERS | 5 +
> drivers/power/reset/Kconfig | 8 +
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/at91-sama5d2_shdwc.c | 282 +++++++++++++++++++++++++++++++
> 4 files changed, 296 insertions(+)
> create mode 100644 drivers/power/reset/at91-sama5d2_shdwc.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5744af3d79ab..a05b14d8d4d2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1999,6 +1999,11 @@ M: Nicolas Ferre <nicolas.ferre@atmel.com>
> S: Supported
> F: drivers/tty/serial/atmel_serial.c
>
> +ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
> +M: Nicolas Ferre <nicolas.ferre@atmel.com>
> +S: Supported
> +F: drivers/power/reset/at91-sama5d2_shdwc.c
> +
> ATMEL SAMA5D2 ADC DRIVER
> M: Ludovic Desroches <ludovic.desroches@atmel.com>
> L: linux-iio@vger.kernel.org
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 0a6408a39c66..9bb2622c23bf 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -30,6 +30,14 @@ config POWER_RESET_AT91_RESET
> This driver supports restart for Atmel AT91SAM9 and SAMA5
> SoCs
>
> +config POWER_RESET_AT91_SAMA5D2_SHDWC
> + tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
> + depends on ARCH_AT91 || COMPILE_TEST
> + default SOC_SAMA5
> + help
> + This driver supports the alternate shutdown controller for some Atmel
> + SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
> +
> config POWER_RESET_AXXIA
> bool "LSI Axxia reset driver"
> depends on ARCH_AXXIA
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 096fa67047f6..ab7aa8614d1f 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -1,6 +1,7 @@
> obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
> obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
> obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
> +obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
> obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
> obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> new file mode 100644
> index 000000000000..8a5ac9706c9c
> --- /dev/null
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -0,0 +1,282 @@
> +/*
> + * Atmel SAMA5D2-Compatible Shutdown Controller (SHDWC) driver.
> + * Found on some SoCs as the sama5d2 (obviously).
> + *
> + * Copyright (C) 2015 Atmel Corporation,
> + * Nicolas Ferre <nicolas.ferre@atmel.com>
> + *
> + * Evolved from driver at91-poweroff.c.
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + *
> + * TODO:
> + * - addition to status of other wake-up inputs [1 - 15]
> + * - Analog Comparator wake-up alarm
> + * - Serial RX wake-up alarm
> + * - low power debouncer
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/printk.h>
> +
> +#define SLOW_CLOCK_FREQ 32768
> +
> +#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
> +#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
> +#define AT91_SHDW_KEY (0xa5UL << 24) /* KEY Password */
> +
> +#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
> +#define AT91_SHDW_WKUPDBC_SHIFT 24
> +#define AT91_SHDW_WKUPDBC_MASK GENMASK(31, 16)
> +#define AT91_SHDW_WKUPDBC(x) (((x) << AT91_SHDW_WKUPDBC_SHIFT) \
> + & AT91_SHDW_WKUPDBC_MASK)
> +
> +#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
> +#define AT91_SHDW_WKUPIS_SHIFT 16
> +#define AT91_SHDW_WKUPIS_MASK GENMASK(31, 16)
> +#define AT91_SHDW_WKUPIS(x) ((1 << (x)) << AT91_SHDW_WKUPIS_SHIFT \
> + & AT91_SHDW_WKUPIS_MASK)
> +
> +#define AT91_SHDW_WUIR 0x0c /* Shutdown Wake-up Inputs Register */
> +#define AT91_SHDW_WKUPEN_MASK GENMASK(15, 0)
> +#define AT91_SHDW_WKUPEN(x) ((1 << (x)) & AT91_SHDW_WKUPEN_MASK)
> +#define AT91_SHDW_WKUPT_SHIFT 16
> +#define AT91_SHDW_WKUPT_MASK GENMASK(31, 16)
> +#define AT91_SHDW_WKUPT(x) ((1 << (x)) << AT91_SHDW_WKUPT_SHIFT \
> + & AT91_SHDW_WKUPT_MASK)
> +
> +#define SHDW_WK_PIN(reg, cfg) ((reg) & AT91_SHDW_WKUPIS((cfg)->wkup_pin_input))
> +#define SHDW_RTCWK(reg, cfg) (((reg) >> ((cfg)->sr_rtcwk_shift)) & 0x1)
> +#define SHDW_RTCWKEN(cfg) (1 << ((cfg)->mr_rtcwk_shift))
> +
> +#define DBC_PERIOD_US(x) DIV_ROUND_UP_ULL((1000000 * (x)), \
> + SLOW_CLOCK_FREQ)
> +
> +struct shdwc_config {
> + u8 wkup_pin_input;
> + u8 mr_rtcwk_shift;
> + u8 sr_rtcwk_shift;
> +};
> +
> +struct shdwc {
> + struct shdwc_config *cfg;
> + void __iomem *at91_shdwc_base;
> +};
> +
> +/*
> + * Hold configuration here, cannot be more than one instance of the driver
> + * since pm_power_off itself is global.
> + */
> +static struct shdwc *at91_shdwc;
> +static struct clk *sclk;
> +
> +static const unsigned long long sdwc_dbc_period[] = {
> + 0, 3, 32, 512, 4096, 32768,
> +};
> +
> +static void __init at91_wakeup_status(struct platform_device *pdev)
> +{
> + struct shdwc *shdw = platform_get_drvdata(pdev);
> + u32 reg;
> + char *reason = "unknown";
> +
> + reg = readl(shdw->at91_shdwc_base + AT91_SHDW_SR);
> +
> + dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg);
> +
> + /* Simple power-on, just bail out */
> + if (!reg)
> + return;
> +
> + if (SHDW_WK_PIN(reg, shdw->cfg))
> + reason = "WKUP pin";
> + else if (SHDW_RTCWK(reg, shdw->cfg))
> + reason = "RTC";
> +
> + pr_info("AT91: Wake-Up source: %s\n", reason);
> +}
> +
> +static void at91_poweroff(void)
> +{
> + writel(AT91_SHDW_KEY | AT91_SHDW_SHDW,
> + at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
> +}
> +
> +static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
> + u32 in_period_us)
> +{
> + int i;
> + int max_idx = ARRAY_SIZE(sdwc_dbc_period) - 1;
> + unsigned long long period_us;
> + unsigned long long max_period_us = DBC_PERIOD_US(sdwc_dbc_period[max_idx]);
> +
> + if (in_period_us > max_period_us) {
> + dev_warn(&pdev->dev,
> + "debouncer period %u too big, reduced to %llu us\n",
> + in_period_us, max_period_us);
> + return max_idx;
> + }
> +
> + for (i = max_idx - 1; i > 0; i--) {
> + period_us = DBC_PERIOD_US(sdwc_dbc_period[i]);
> + dev_dbg(&pdev->dev, "%s: ref[%d] = %llu\n",
> + __func__, i, period_us);
> + if (in_period_us > period_us)
> + break;
> + }
> +
> + return i + 1;
> +}
> +
> +static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
> + struct device_node *np)
> +{
> + struct device_node *cnp;
> + u32 wk_input_mask;
> + u32 wuir = 0;
> + u32 wk_input;
> +
> + for_each_child_of_node(np, cnp) {
> + if (of_property_read_u32(cnp, "reg", &wk_input)) {
> + dev_warn(&pdev->dev, "reg property is missing for %s\n",
> + cnp->full_name);
> + continue;
> + }
> +
> + wk_input_mask = 1 << wk_input;
> + if (!(wk_input_mask & AT91_SHDW_WKUPEN_MASK)) {
> + dev_warn(&pdev->dev,
> + "wake-up input %d out of bounds ignore\n",
> + wk_input);
> + continue;
> + }
> + wuir |= wk_input_mask;
> +
> + if (of_property_read_bool(cnp, "atmel,wakeup-active-high"))
> + wuir |= AT91_SHDW_WKUPT(wk_input);
> +
> + dev_dbg(&pdev->dev, "%s: (child %d) wuir = %#x\n",
> + __func__, wk_input, wuir);
> + }
> +
> + return wuir;
> +}
> +
> +static void at91_shdwc_dt_configure(struct platform_device *pdev)
> +{
> + struct shdwc *shdw = platform_get_drvdata(pdev);
> + struct device_node *np = pdev->dev.of_node;
> + u32 mode = 0, tmp, input;
> +
> + if (!np) {
> + dev_err(&pdev->dev, "device node not found\n");
> + return;
> + }
> +
> + if (!of_property_read_u32(np, "debounce-delay-us", &tmp))
> + mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev, tmp));
> +
> + if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
> + mode |= SHDW_RTCWKEN(shdw->cfg);
> +
> + dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
> + writel(mode, shdw->at91_shdwc_base + AT91_SHDW_MR);
> +
> + input = at91_shdwc_get_wakeup_input(pdev, np);
> + writel(input, shdw->at91_shdwc_base + AT91_SHDW_WUIR);
> +}
> +
> +static const struct shdwc_config sama5d2_shdwc_config = {
> + .wkup_pin_input = 0,
> + .mr_rtcwk_shift = 17,
> + .sr_rtcwk_shift = 5,
> +};
> +
> +static const struct of_device_id at91_shdwc_of_match[] = {
> + {
> + .compatible = "atmel,sama5d2-shdwc",
> + .data = &sama5d2_shdwc_config,
> + }, {
> + /*sentinel*/
> + }
> +};
> +MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
> +
> +static int __init at91_shdwc_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + const struct of_device_id *match;
> + int ret;
> +
> + if (!pdev->dev.of_node)
> + return -ENODEV;
> +
> + at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
> + if (!at91_shdwc)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, at91_shdwc);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + at91_shdwc->at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(at91_shdwc->at91_shdwc_base)) {
> + dev_err(&pdev->dev, "Could not map reset controller address\n");
> + return PTR_ERR(at91_shdwc->at91_shdwc_base);
> + }
> +
> + match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
> + at91_shdwc->cfg = (struct shdwc_config *)(match->data);
> +
> + sclk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(sclk))
> + return PTR_ERR(sclk);
> +
> + ret = clk_prepare_enable(sclk);
> + if (ret) {
> + dev_err(&pdev->dev, "Could not enable slow clock\n");
> + return ret;
> + }
> +
> + at91_wakeup_status(pdev);
> +
> + at91_shdwc_dt_configure(pdev);
> +
> + pm_power_off = at91_poweroff;
> +
> + return 0;
> +}
> +
> +static int __exit at91_shdwc_remove(struct platform_device *pdev)
> +{
> + struct shdwc *shdw = platform_get_drvdata(pdev);
> +
> + if (pm_power_off == at91_poweroff)
> + pm_power_off = NULL;
> +
> + /* Reset values to disable wake-up features */
> + writel(0, shdw->at91_shdwc_base + AT91_SHDW_MR);
> + writel(0, shdw->at91_shdwc_base + AT91_SHDW_WUIR);
> +
> + clk_disable_unprepare(sclk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver at91_shdwc_driver = {
> + .remove = __exit_p(at91_shdwc_remove),
> + .driver = {
> + .name = "at91-shdwc",
> + .of_match_table = at91_shdwc_of_match,
> + },
> +};
> +module_platform_driver_probe(at91_shdwc_driver, at91_shdwc_probe);
> +
> +MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
> +MODULE_DESCRIPTION("Atmel shutdown controller driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.1.3
>

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-03-17 22:01    [W:0.098 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site