lkml.org 
[lkml]   [2016]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 12/13] thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_register


On 2016年03月15日 05:16, Eduardo Valentin wrote:
> * PGP Signed by an unknown key
>
> On Thu, Mar 10, 2016 at 04:46:55PM +0800, Wei Ni wrote:
>>
>>
>> On 2016年03月10日 05:35, Eduardo Valentin wrote:
>>> This changes the driver to use the devm_ version
>>> of thermal_zone_of_sensor_register and cleans
>>> up the local points and unregister calls.
>>>
>>> Cc: Zhang Rui <rui.zhang@intel.com>
>>> Cc: Stephen Warren <swarren@wwwdotorg.org>
>>> Cc: Thierry Reding <thierry.reding@gmail.com>
>>> Cc: Alexandre Courbot <gnurou@gmail.com>
>>> Cc: linux-pm@vger.kernel.org
>>> Cc: linux-tegra@vger.kernel.org
>>> Cc: linux-kernel@vger.kernel.org
>>> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
>>> ---
>>> drivers/thermal/tegra_soctherm.c | 31 +++++++++----------------------
>>> 1 file changed, 9 insertions(+), 22 deletions(-)
>>>
>>> diff --git a/drivers/thermal/tegra_soctherm.c b/drivers/thermal/tegra_soctherm.c
>>> index 74ea576..0018ccd 100644
>>> --- a/drivers/thermal/tegra_soctherm.c
>>> +++ b/drivers/thermal/tegra_soctherm.c
>>> @@ -168,7 +168,7 @@ struct tegra_soctherm {
>>> struct clk *clock_soctherm;
>>> void __iomem *regs;
>>>
>>> - struct thermal_zone_device *thermctl_tzs[4];
>>> +#define ZONE_NUMBER 4
>>> };
>>>
>>> struct tsensor_shared_calibration {
>>> @@ -342,7 +342,7 @@ static const struct thermctl_zone_desc t124_thermctl_temp_zones[] = {
>>> static int tegra_soctherm_probe(struct platform_device *pdev)
>>> {
>>> struct tegra_soctherm *tegra;
>>> - struct thermal_zone_device *tz;
>>> + struct thermal_zone_device *z;
>>> struct tsensor_shared_calibration shared_calib;
>>> struct resource *res;
>>> unsigned int i;
>>> @@ -408,36 +408,29 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>>>
>>> /* Initialize thermctl sensors */
>>>
>>> - for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
>>> + for (i = 0; i < ZONE_NUMBER; ++i) {
>>> struct tegra_thermctl_zone *zone =
>>> devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
>>> if (!zone) {
>>> err = -ENOMEM;
>>> - goto unregister_tzs;
>>> + goto disable_clocks;
>>> }
>>>
>>> zone->reg = tegra->regs + t124_thermctl_temp_zones[i].offset;
>>> zone->shift = t124_thermctl_temp_zones[i].shift;
>>>
>>> - tz = thermal_zone_of_sensor_register(&pdev->dev, i, zone,
>>> - &tegra_of_thermal_ops);
>>> - if (IS_ERR(tz)) {
>>> - err = PTR_ERR(tz);
>>> + z = devm_thermal_zone_of_sensor_register(&pdev->dev, i, zone,
>>
>> I prefer to still use "tz", it seems this line isn't over 80 characters, or we
>> can add newline.
>
>
> Yeah,
>
>
>>
>>> + &tegra_of_thermal_ops);
>
> CHECK: Alignment should match open parenthesis
> #423: FILE: drivers/thermal/tegra_soctherm.c:423:
> + tz = devm_thermal_zone_of_sensor_register(&pdev->dev, i, zone,
> + &tegra_of_thermal_ops);
>
> and if you align it, then, you get the warning:
> WARNING: line over 80 characters
> #423: FILE: drivers/thermal/tegra_soctherm.c:423:
> + &tegra_of_thermal_ops);
>
> And I did not want to add either of the above to the driver.
>
> But if you prefer tz over z, we can keep the first (check) then.
>
> What do you prefer?

Hmm, I see.
Ok, it's better to use "z" to resolve it.

Wei.
>
>
>
>
>
> * Unknown Key
> * 0x7DA4E256
>

\
 
 \ /
  Last update: 2016-03-15 07:21    [W:0.347 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site