lkml.org 
[lkml]   [2016]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] rtc: s3c: Don't print an error on probe deferral
From
Date
On Mon, 2016-03-14 at 16:31 -0300, Javier Martinez Canillas wrote:
> On 03/14/2016 04:11 PM, Joe Perches wrote:> > On Mon, 2016-03-14 at 16:05 -0300, Javier Martinez Canillas wrote:
> > >
> > > The clock and source clock looked up by the driver may not be available
> > > just because the clock controller driver was not probed yet so printing
> > > an error in this case is not correct and only adds confusion to users.
> > >
> > > However, knowing that a driver's probe was deferred may be useful so it
> > > can be printed as debug information.
> > []
> > >
> > > diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
> > []
> > >
> > > @@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev)
> > >  
> > >   info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
> > >   if (IS_ERR(info->rtc_clk)) {
> > > - dev_err(&pdev->dev, "failed to find rtc clock\n");
> > > - return PTR_ERR(info->rtc_clk);
> > > + ret = PTR_ERR(info->rtc_clk);
> > > + if (ret != -EPROBE_DEFER)
> > > + dev_err(&pdev->dev, "failed to find rtc clock\n");
> > > + else
> > > + dev_dbg(&pdev->dev, "probe deferred due rtc clock\n");
> > > + return ret;
> > >   }
> > >   clk_prepare_enable(info->rtc_clk);
> > >  
> > >   if (info->data->needs_src_clk) {
> > >   info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
> > >   if (IS_ERR(info->rtc_src_clk)) {
> > > - dev_err(&pdev->dev,
> > > - "failed to find rtc source clock\n");
> > > + ret = PTR_ERR(info->rtc_src_clk);
> > > + if (ret != -EPROBE_DEFER)
> > > + dev_err(&pdev->dev,
> > > + "failed to find rtc source clock\n");
> > > + else
> > > + dev_dbg(&pdev->dev,
> > > + "probe deferred due rtc source clock\n");
> > >   clk_disable_unprepare(info->rtc_clk);
> > > - return PTR_ERR(info->rtc_src_clk);
> > > + return ret;
> > >   }
> > >   clk_prepare_enable(info->rtc_src_clk);
> > >   }
> > Maybe the debug logging messages could be object->action like:
> >
> > rtc clock probe deferred
> > rtc source clock probe deferred
> >
> I found your suggested messages harder to read and more confusing. The
> action that happens is a probe function deferral and that is caused by
> a missing resource needed by the driver (clocks in this case).
>
> But your messages seems to imply that the probe deferred action happens
> to a clock, it sounds like "rtc clock disabled" and that's not correct.

OK, then please change "due" to "due to" or "for" in your messages
because they make little sense now.


\
 
 \ /
  Last update: 2016-03-14 21:21    [W:0.961 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site