lkml.org 
[lkml]   [2016]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] tty: serial: 8250: add MOXA Smartio MUE boards support
From
Date
24.02.2016 22:10, Mathieu OTHACEHE пишет:
> Add support for :
>
> - CP-102E: 2 ports RS232 PCIE card
> - CP-102EL: 2 ports RS232 PCIE card
> - CP-132EL: 2 ports RS422/485 PCIE card
> - CP-114EL: 4 ports RS232/422/485 PCIE card
> - CP-104EL-A: 4 ports RS232 PCIE card
> - CP-168EL-A: 8 ports RS232 PCIE card
> - CP-118EL-A: 8 ports RS232/422/485 PCIE card
> - CP-118E-A: 8 ports RS422/485 PCIE card
> - CP-138E-A: 8 ports RS422/485 PCIE card
> - CP-134EL-A: 4 ports RS422/485 PCIE card
> - CP-116E-A (A): 8 ports RS232/422/485 PCIE card
> - CP-116E-A (B): 8 ports RS232/422/485 PCIE card
>
> This patch is based on information extracted from
> vendor mxupcie driver available on MOXA website.
>
> I was able to test it on a CP-168EL-A on PC.

Hi,

Are you currently planning to add RS485 support to this module?
I mean TIOCGRS485/TIOCSRS485.

I have old MOXA CP-132U PCI-based board in may labs.
What do you think, should 8250_moxa also support PCI-based boards?

>
> Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
> ---
>
> Hi,
>
> Here is v3 of the patch, it fixes problems pointed out by
> last Andy review.
>
> Thanks,
> Mathieu
>
> Changelog:
> V3:
> * Add supported boards to 8250_pci blacklist
> * Use MOXA_DEVICE macro to simplify pci_device_id declaration
> V2:
> * Move everything to 8250_moxa.c
> * Use PCI_DEVICE macro
> * Group driver_data by port number as this is the only singularity between boards.
>
> drivers/tty/serial/8250/8250_moxa.c | 157 ++++++++++++++++++++++++++++++++++++
> drivers/tty/serial/8250/8250_pci.c | 14 ++++
> drivers/tty/serial/8250/Kconfig | 10 +++
> drivers/tty/serial/8250/Makefile | 1 +
> 4 files changed, 182 insertions(+)
> create mode 100644 drivers/tty/serial/8250/8250_moxa.c
>
> diff --git a/drivers/tty/serial/8250/8250_moxa.c b/drivers/tty/serial/8250/8250_moxa.c
> new file mode 100644
> index 0000000..26eb539
> --- /dev/null
> +++ b/drivers/tty/serial/8250/8250_moxa.c
> @@ -0,0 +1,157 @@
> +/*
> + * 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
> + *
> + * Author: Mathieu OTHACEHE <m.othacehe@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +
> +#include "8250.h"
> +
> +#define PCI_DEVICE_ID_MOXA_CP102E 0x1024
> +#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025
> +#define PCI_DEVICE_ID_MOXA_CP104EL_A 0x1045
> +#define PCI_DEVICE_ID_MOXA_CP114EL 0x1144
> +#define PCI_DEVICE_ID_MOXA_CP116E_A_A 0x1160
> +#define PCI_DEVICE_ID_MOXA_CP116E_A_B 0x1161
> +#define PCI_DEVICE_ID_MOXA_CP118EL_A 0x1182
> +#define PCI_DEVICE_ID_MOXA_CP118E_A_I 0x1183
> +#define PCI_DEVICE_ID_MOXA_CP132EL 0x1322
> +#define PCI_DEVICE_ID_MOXA_CP134EL_A 0x1342
> +#define PCI_DEVICE_ID_MOXA_CP138E_A 0x1381
> +#define PCI_DEVICE_ID_MOXA_CP168EL_A 0x1683
> +
> +#define MOXA_BASE_BAUD 921600
> +#define MOXA_UART_OFFSET 0x200
> +#define MOXA_BASE_BAR 1
> +
> +struct moxa8250_board {
> + unsigned int num_ports;
> + int line[0];
> +};
> +
> +enum {
> + moxa8250_2p = 0,
> + moxa8250_4p,
> + moxa8250_8p
> +};
> +
> +static struct moxa8250_board moxa8250_boards[] = {
> + [moxa8250_2p] = { .num_ports = 2},
> + [moxa8250_4p] = { .num_ports = 4},
> + [moxa8250_8p] = { .num_ports = 8},
> +};
> +
> +static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +{
> + struct uart_8250_port uart;
> + struct moxa8250_board *brd;
> + void __iomem *ioaddr;
> + resource_size_t baseaddr;
> + unsigned int i, nr_ports;
> + unsigned int offset;
> + int ret;
> +
> + brd = &moxa8250_boards[id->driver_data];
> + nr_ports = brd->num_ports;
> +
> + ret = pcim_enable_device(pdev);
> + if (ret)
> + return ret;
> +
> + brd = devm_kzalloc(&pdev->dev, sizeof(struct moxa8250_board) +
> + sizeof(unsigned int) * nr_ports, GFP_KERNEL);
> + if (!brd)
> + return -ENOMEM;
> +
> + memset(&uart, 0, sizeof(struct uart_8250_port));
> +
> + uart.port.dev = &pdev->dev;
> + uart.port.irq = pdev->irq;
> + uart.port.uartclk = MOXA_BASE_BAUD * 16;
> + uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
> +
> + baseaddr = pci_resource_start(pdev, MOXA_BASE_BAR);
> + ioaddr = pcim_iomap(pdev, MOXA_BASE_BAR, 0);
> + if (!ioaddr)
> + return -ENOMEM;
> +
> + for (i = 0; i < nr_ports; i++) {
> +
> + /*
> + * MOXA Smartio MUE boards with 4 ports have
> + * a different offset for port #3
> + */
> + if (nr_ports == 4 && i == 3)
> + offset = 7 * MOXA_UART_OFFSET;
> + else
> + offset = i * MOXA_UART_OFFSET;
> +
> + uart.port.iotype = UPIO_MEM;
> + uart.port.iobase = 0;
> + uart.port.mapbase = baseaddr + offset;
> + uart.port.membase = ioaddr + offset;
> + uart.port.regshift = 0;
> +
> + dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
> + uart.port.iobase, uart.port.irq, uart.port.iotype);
> +
> + brd->line[i] = serial8250_register_8250_port(&uart);
> + if (brd->line[i] < 0) {
> + dev_err(&pdev->dev,
> + "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
> + uart.port.iobase, uart.port.irq,
> + uart.port.iotype, brd->line[i]);
> + break;
> + }
> + }
> +
> + pci_set_drvdata(pdev, brd);
> + return 0;
> +}
> +
> +static void moxa8250_remove(struct pci_dev *pdev)
> +{
> + struct moxa8250_board *brd = pci_get_drvdata(pdev);
> + unsigned int i;
> +
> + for (i = 0; i < brd->num_ports; i++)
> + serial8250_unregister_port(brd->line[i]);
> +}
> +
> +#define MOXA_DEVICE(id, data) { PCI_VDEVICE(MOXA, id), (kernel_ulong_t)data }
> +
> +static const struct pci_device_id pci_ids[] = {
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102E, moxa8250_2p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102EL, moxa8250_2p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP104EL_A, moxa8250_4p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP114EL, moxa8250_4p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_A, moxa8250_8p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_B, moxa8250_8p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118EL_A, moxa8250_8p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118E_A_I, moxa8250_8p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP132EL, moxa8250_2p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP134EL_A, moxa8250_4p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP138E_A, moxa8250_8p),
> + MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP168EL_A, moxa8250_8p),
> + {0}
> +};
> +MODULE_DEVICE_TABLE(pci, pci_ids);
> +
> +static struct pci_driver moxa8250_pci_driver = {
> + .name = "8250_moxa",
> + .id_table = pci_ids,
> + .probe = moxa8250_probe,
> + .remove = moxa8250_remove,
> +};
> +
> +module_pci_driver(moxa8250_pci_driver);
> +
> +MODULE_AUTHOR("Mathieu OTHACEHE");
> +MODULE_DESCRIPTION("MOXA SmartIO MUE driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
> index 0fc6ab5..855d16d 100644
> --- a/drivers/tty/serial/8250/8250_pci.c
> +++ b/drivers/tty/serial/8250/8250_pci.c
> @@ -3952,6 +3952,20 @@ static const struct pci_device_id blacklist[] = {
> { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
> { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
>
> + /* Moxa Smartio MUE boards handled by 8250_moxa */
> + { PCI_VDEVICE(MOXA, 0x1024), },
> + { PCI_VDEVICE(MOXA, 0x1025), },
> + { PCI_VDEVICE(MOXA, 0x1045), },
> + { PCI_VDEVICE(MOXA, 0x1144), },
> + { PCI_VDEVICE(MOXA, 0x1160), },
> + { PCI_VDEVICE(MOXA, 0x1161), },
> + { PCI_VDEVICE(MOXA, 0x1182), },
> + { PCI_VDEVICE(MOXA, 0x1183), },
> + { PCI_VDEVICE(MOXA, 0x1322), },
> + { PCI_VDEVICE(MOXA, 0x1342), },
> + { PCI_VDEVICE(MOXA, 0x1381), },
> + { PCI_VDEVICE(MOXA, 0x1683), },
> +
> /* Intel platforms with MID UART */
> { PCI_VDEVICE(INTEL, 0x081b), },
> { PCI_VDEVICE(INTEL, 0x081c), },
> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
> index 67ad6b0..349f571 100644
> --- a/drivers/tty/serial/8250/Kconfig
> +++ b/drivers/tty/serial/8250/Kconfig
> @@ -402,6 +402,16 @@ config SERIAL_8250_MID
> present on the UART found on Intel Medfield SOC and various other
> Intel platforms.
>
> +config SERIAL_8250_MOXA
> + tristate "MOXA SmartIO MUE support"
> + depends on SERIAL_8250 && PCI
> + help
> + Say Y here if you have a Moxa SmartIO MUE multiport serial card.
> + If unsure, say N.
> +
> + This driver can also be built as a module. The module will be called
> + 8250_moxa. If you want to do that, say M here.
> +
> config SERIAL_OF_PLATFORM
> tristate "Devicetree based probing for 8250 ports"
> depends on SERIAL_8250 && OF
> diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
> index 5c1869f..c9a2d6e 100644
> --- a/drivers/tty/serial/8250/Makefile
> +++ b/drivers/tty/serial/8250/Makefile
> @@ -29,6 +29,7 @@ obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
> obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
> obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
> obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o
> +obj-$(CONFIG_SERIAL_8250_MOXA) += 8250_moxa.o
> obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o
>
> CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
>

\
 
 \ /
  Last update: 2016-03-14 11:21    [W:0.022 / U:1.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site