Messages in this thread Patch in this message | | | From | Caesar Wang <> | Subject | [PATCH v2 2/9] net: arc_emac: add phy reset is optional for device tree | Date | Sun, 13 Mar 2016 17:07:35 +0800 |
| |
This patch adds the following property for arc_emac.
1) reset-gpios: The phy reset-gpio is an optional property for arc emac device tree boot. Change the binding document to match the driver code.
2) phy-reset-duration: Different boards may require different phy reset duration. Add property phy-reset-duration for device tree probe, so that the boards that need a longer reset duration can specify it in their device tree.
Anyway, we can add the above property for arc emac.
Signed-off-by: Caesar Wang <wxt@rock-chips.com> ---
Changes in v2: None
Documentation/devicetree/bindings/net/arc_emac.txt | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt index a1d71eb..8e84b52 100644 --- a/Documentation/devicetree/bindings/net/arc_emac.txt +++ b/Documentation/devicetree/bindings/net/arc_emac.txt @@ -7,6 +7,13 @@ Required properties: - max-speed: see ethernet.txt file in the same directory. - phy: see ethernet.txt file in the same directory. +Optional properties: +- reset-gpios : Should specify the gpio for phy reset +- phy-reset-duration : Reset duration in milliseconds. Should present + only if property "reset-gpios" is available. Missing the property + will have the duration be 1 millisecond. Numbers greater than 1000 are + invalid and 1 millisecond will be used instead. + Clock handling: The clock frequency is needed to calculate and set polling period of EMAC. It must be provided by one of: -- 1.9.1
| |