Messages in this thread Patch in this message | | | From | Ludovic Desroches <> | Subject | [PATCH] ARM: at91/dt: sama5d4 xplained: don't disable hsmci regulator | Date | Fri, 11 Mar 2016 11:35:10 +0100 |
| |
If enabling the hsmci regulator on card detection, the board can reboot on sd card insertion. Keeping the regulator always enabled fixes this issue.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: 8d545f32bd77 ("ARM: at91/dt: sama5d4 xplained: add regulators for v(q)mmc1 supplies") Cc: stable@vger.kernel.org #4.3 and later --- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 569026e..da84e65 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -268,5 +268,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_3v3_reg>; + regulator-always-on; }; }; -- 2.5.0
| |