lkml.org 
[lkml]   [2016]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH v2 1/3] PCI: hisi: re-architect Hip05/Hip06 controllers driver to preapare for ACPI
Date
On Monday 08 February 2016 16:51:19 Gabriele Paoloni wrote:
> > From: Arnd Bergmann [mailto:arnd@arndb.de]
> > On Monday 08 February 2016 16:06:54 Gabriele Paoloni wrote:
> > > > On Monday 08 February 2016 12:41:02 Gabriele Paoloni wrote:
> > int
> > > > size,
> > > > > + u32 *val)
> > > > > +{
> > > > > + u32 reg;
> > > > > + u32 reg_val;
> > > > > + void *walker = &reg_val;
> > > > > +
> > > > > + walker += (where & 0x3);
> > > > > + reg = where & ~0x3;
> > > > > + reg_val = readl(reg_base + reg);
> > > > > +
> > > > > + if (size == 1)
> > > > > + *val = *(u8 __force *) walker;
> > > > > + else if (size == 2)
> > > > > + *val = *(u16 __force *) walker;
> > > > > + else if (size == 4)
> > > > > + *val = reg_val;
> > > > > + else
> > > > > + return PCIBIOS_BAD_REGISTER_NUMBER;
> > > > > +
> > > > > + return PCIBIOS_SUCCESSFUL;
> > > > > +}
> > > >
> > > > Isn't this the same hack that Qualcomm are using?
> > >
> > > As far as I can see Qualcomm defines its own config access
> > > mechanism only for RC config read and also it seems they're
> > > having problems with reporting the device class...
> > >
> > > https://github.com/torvalds/linux/blob/master/drivers/pci/host/pcie-
> > qcom.c#L474
> > >
> > > Our problem is that our HW can only perform 32b rd/wr accesses
> > > So we can't use readw/readb/writew/writeb...
> > >
> > >
> >
> > Sorry, my mistake, I meant Cavium not Qualcomm.
> > See https://lkml.org/lkml/2016/2/5/689 for the patches.
>
> Well, looking at it Cavium seems quite different,
>
> On read they need to trigger the retrieval of the
> config space info writing to the lower 32b of a 64b register,
> then they need to read data back on the upper 64b of the
> same register and adjust the content to remove the garbage...
>
> We just use 32b accesses and adjust grab the appropriate
> bytes depending on the read/write sizes...

Hmm, I must have misremembered that too then, let me try once more ;-)

The above appears to reimplement pci_generic_config_read32(). Can you
just use that instead?

Arnd

\
 
 \ /
  Last update: 2016-02-09 17:41    [W:0.078 / U:53.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site