lkml.org 
[lkml]   [2016]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Re: [PATCH v2 06/10] ARM64: dts: rockchip: Add IR receiver to GeekBox

Le 09/02/2016 04:08, Andreas Färber a écrit :
> Am 08.02.2016 um 03:17 schrieb Andreas Färber:
>> Signed-off-by: Andreas Färber <afaerber@suse.de>
>> ---
>> v2: New
>>
>> arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts | 13 +++++++++++++
>> 1 file changed, 13 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
>> index e4523a74050f..e84383fd6f10 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
>> @@ -63,6 +63,13 @@
>> #clock-cells = <0>;
>> };
>>
>> + ir: ir-receiver {
>> + compatible = "gpio-ir-receiver";
>> + gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&ir_int>;
> status = "disabled";
>
> Should only be enabled in the new Landingship config. Will fix.
>
> Andreas
Actually there's two IR receivers:
- one on the geekbox module (on the bottom side)
- and another one on the landingship.

Both are connected to the same GPIO pin, so you can keep it enabled in
the main geekbox dts.

About the pinctrl, same remark as for gpio-keys: there's already
external pull-up resistors on this pin, so it should be better to use
pcfg_pull_none instead of pcfg_pull_up.

Julien
>
> P.S. See Heiko, two bugs in the new nodes already, glad I have them
> separate. :)
>
>> + };
>> +
>> leds: gpio-leds {
>> compatible = "gpio-leds";
>>
> [snip]
>

\
 
 \ /
  Last update: 2016-02-09 12:01    [W:0.196 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site