lkml.org 
[lkml]   [2016]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] drm: introduce bus_flags in drm_display_info
Date
Introduce bus_flags to specify display bus properties like signal
polarities. This is useful for parallel display buses, e.g. to
specify the pixel clock or data enable polarity.

Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
include/drm/drm_crtc.h | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index c65a212..20a489d 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -126,6 +126,14 @@ enum subpixel_order {
#define DRM_COLOR_FORMAT_RGB444 (1<<0)
#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
+
+#define DRM_BUS_FLAG_DE_LOW (1<<0)
+#define DRM_BUS_FLAG_DE_HIGH (1<<1)
+/* drive data on pos. edge */
+#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
+/* drive data on neg. edge */
+#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+
/*
* Describes a given display (e.g. CRT or flat panel) and its limitations.
*/
@@ -147,6 +155,7 @@ struct drm_display_info {

const u32 *bus_formats;
unsigned int num_bus_formats;
+ u32 bus_flags;

/* Mask of supported hdmi deep color modes */
u8 edid_hdmi_dc_modes;
--
2.7.1
\
 
 \ /
  Last update: 2016-02-08 23:21    [W:0.137 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site