lkml.org 
[lkml]   [2016]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Salvator-X ravb failure with v4.5-rc3 due to irqchip power down

> The real problem is that the PHY interrupt is wired to an on-chip GPIO
> controller, which is disabled by PM Runtime if no GPIOs are in use, and
> interrupts are not taken into account (the irqchip subsystem is not (yet) PM
> Runtime aware) for GPIO use.
>
> Adding a call to
>
> pm_runtime_get_sync(dev);
>
> to gpio_rcar_probe() fixes the problem, but keeps the GPIO modules enabled
> all the time.
>
> IIRC, we have a similar issue with HDMI on r8a7791/koelsch...

Exactly, the interrupt for 'EDID read done' never arrived because of
this.

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-02-08 21:21    [W:0.118 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site